system toolbox » voip

prijavljuje kada nazovem 600#

[Jul  3 15:54:28] WARNING[19129]: pbx.c:1832 pbx_extension_helper: No application 'MeetMe' for extension (demo, 600, 1)
  == Spawn extension (demo, 600, 1) exited non-zero on 'SIP/50-08225aa8'

našao neki info ovdje

http://www.spiration.co.uk/post/1317/No%20application

riječ je ztdummy.so i zaptel driverima i modulima, navodno bez njih ne može

pokušao odraditi ovo u /etc/asterisk/modules.conf

load => app_meetme.so

ali opet ne radi

dakle, to nešto ipak treba više odraditi

root@ifold# sudo apt-get install zaptel

root@ifold# aptitude show zaptel

Paket: zaptel
State: installed
Automatically installed: yes
Verzija: 1:1.4.3~dfsg-2ubuntu1
Prioritet: opcionalno
Sekcija: universe/sound
Održavatelj: Ubuntu MOTU Developers <ubuntu-motu@lists.ubuntu.com>
Dekompresovana veličina: 754k
Zavisi: libc6 (>= 2.6-1), libnewt0.52, libtonezone1 (>= 1:1.4.3~dfsg),
        libusb-0.1-4 (>= 2:0.1.12), procps, fxload
Description: zapata telephony utilities
 Userspace utilities for configuring the Zapata telephony kernel driver, which
 supports various telephony hardware, such as Wildcard series of interface cards
 (X100P, T400P, E400P, S100P, S100U). 

 Includes ztcfg and zttool utils.

ali gdje se nalazi ztdummy kernel modul nemam pojma

http://ubuntuforums.org/showthread.php?t=89489&page=2

 Re: Error installing Asterisk
From the free O'Reilly Asterisk book:

Quote:
On a 2.6 kernel–based distribution, ztdummy does not require the use of the USB controller. (As of v2.6.0, the kernel now provides 1-kHz timing with which the driver can interface; thus, the USB controller hardware requirement is no longer necessary.)

http://www.voip-info.org/wiki-Asterisk+timer+ztdummy

http://www.voip-info.org/wiki/view/Asterisk+Zaptel+Installation

...

Download
The most recent stable version of the drivers can be found on the Digium files Server: http://downloads.digium.com/pub/telephony/zaptel/

Developer Method:
You need to use subversion to download the source code for the zaptel package. The following commands assume you are using a bash-style shell:

   cd /usr/src
   svn checkout http://svn.digium.com/svn/zaptel/branches/1.4 zaptel

Compile
First check /usr/src/zaptel/zconfig.h for any specific configuration changes that might be appropriate. Then:
   ./configure            # cheks build syste. Not needed before 1.4
   make
   make install

If you get problems with 'depmod -a' announcing unresolved symbols, then

    * Try running 'depmod -ae' to see the names of the symbols it can't resolve. Maybe the names can give a hint where to look next.
    * Make sure you're using the latest versions of the various development tools (gcc etc)
    * Make sure you've got the kernel source / kernel headers, and kernel image all at a matching version. 

Install
If the kernel module compiled, try
   modprobe ztdummy  (only if using ztdummy)
   modprobe zaptel
which should quietly load the zaptel kernel module and not output any error messages.

zaptel se nalazi u git repos-u:

http://git.bring.out.ba/gitweb.cgi?p=asterisk_zaptel.git;a=shortlog;h=refs/heads/tags/1.4.10

root@ifold:~/devel/git/asterisk_zaptel# git clone git://git.bring.out.ba/asterisk_zaptel.git
root@ifold:~/devel/git/asterisk_zaptel# git checkout -b tags/1.4.10.1 origin/tags/1.4.10.1

root@ifold:~/devel/git/asterisk_zaptel# make -C /lib/modules/2.6.18-053.5hernad3-openvz-misdn/build SUBDIRS=/root/devel/git/asterisk_zaptel/kernel HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="zaptel.o ztdummy.o" modules

make: Entering directory `/root/devel/hg/kernel/openvz/linux-2.6.18-openvz'
  CC [M]  /root/devel/git/asterisk_zaptel/kernel/zaptel-base.o
  LD [M]  /root/devel/git/asterisk_zaptel/kernel/zaptel.o
  Building modules, stage 2.
  MODPOST
  CC      /root/devel/git/asterisk_zaptel/kernel/zaptel.mod.o
  LD [M]  /root/devel/git/asterisk_zaptel/kernel/zaptel.ko
  CC      /root/devel/git/asterisk_zaptel/kernel/ztdummy.mod.o
  LD [M]  /root/devel/git/asterisk_zaptel/kernel/ztdummy.ko
make: Leaving directory `/root/devel/hg/kernel/openvz/linux-2.6.18-openvz'

root@ifold:~/devel/git/asterisk_zaptel# make install-modules

make -C /lib/modules/2.6.18-053.5hernad3-openvz-misdn/build SUBDIRS=/root/devel/git/asterisk_zaptel/kernel HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="zaptel.o ztd-eth.o ztd-loc.o ztdummy.o ztdynamic.o zttranscode.o wct4xxp/ wctc4xxp/ xpp/ wctdm24xxp/ wcte12xp/" INSTALL_MOD_PATH= INSTALL_MOD_DIR=misc modules_install
make[1]: Entering directory `/root/devel/hg/kernel/openvz/linux-2.6.18-openvz'
  INSTALL /root/devel/git/asterisk_zaptel/kernel/zaptel.ko
  INSTALL /root/devel/git/asterisk_zaptel/kernel/ztdummy.ko
  DEPMOD  2.6.18-053.5hernad3-openvz-misdn
make[1]: Leaving directory `/root/devel/hg/kernel/openvz/linux-2.6.18-openvz'
[ `id -u` = 0 ] && /sbin/depmod -a 2.6.18-053.5hernad3-openvz-misdn || :

root@ifold:~/devel/git/asterisk_zaptel# modprobe ztdummy

root@ifold:~/devel/git/asterisk_zaptel# lsmod | grep ztdummy

ztdummy                13000  0 
zaptel                194052  1 ztdummy

međutim i asterisk treba biti kompajliran sa zaptel podrškom

root@ifold:~/devel/hg/asterisk/asterisk/asterisk# ./configure --with-zaptel=/root/devel/git/asterisk_zaptel

checking for ZT_DIAL_OP_CANCEL in zaptel/zaptel.h... no
configure: ***
configure: *** The Zaptel installation on this system appears to be broken.
configure: *** Either correct the installation, or run configure
configure: *** including --without-zaptel.

hm ali to nešto nije uredu ...