Akcije
Greške #15213
Zatvoren
fbze, zaptel opet problem sa zauzećem izlaznih linija
Početak:
01.09.2008
Završetak:
% završeno:
90%
Procjena vremena:
Opis
jutros me kenan zove i kaže možemo li vratiti na staru telefoniju dok ovo ne napravimo
Fajlovi
Izmjenjeno od Saša Vranić prije skoro 17 godina
pokušavam se evo zakačiti na fb server da vidim šta je u pitanju
Izmjenjeno od Saša Vranić prije skoro 17 godina
evo sam se zakačio i evo šta javlja
-- Executing [061789236@fbze:1] Macro("SIP/50-c002f690", "set_caller_id") in new stack
-- Executing [s@macro-set_caller_id:1] GotoIf("SIP/50-c002f690", "?2:4") in new stack
-- Goto (macro-set_caller_id,s,4)
-- Executing [s@macro-set_caller_id:4] Set("SIP/50-c002f690", "CALLERID(all)=032200270") in new stack
-- Executing [s@macro-set_caller_id:5] NoOp("SIP/50-c002f690", "Finish if-set_caller_id-6") in new stack
-- Executing [061789236@fbze:2] Dial("SIP/50-c002f690", "ZAP/g1/061789236") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g1/061789236
-- Zap/4-1 is proceeding passing it to SIP/50-c002f690
-- Channel 0/1, span 2 got hangup request, cause 3
-- Hungup 'Zap/4-1'
== Everyone is busy/congested at this time (1:0/0/1)
== Auto fallthrough, channel 'SIP/50-c002f690' status is 'CHANUNAVAIL'
Izmjenjeno od Saša Vranić prije skoro 17 godina
u /etc/asterisk/zapata.conf stajalo
[channels] switchtype = euroisdn pridialplan = dynamic prilocaldialplan = local usecallingpres=yes echocancel = yes echocancelwhenbridged = yes echotraining = 100 ;------------------------------------------------------------------- ; p2p TE mode (for connecting ISDN lines in point-to-point mode) signalling = bri_cpe_ptmp context=fbze group = 1 ; S/T port 1-4 (first quadBRI, or lower ports of an octoBRI) channel => 1-2 signaling = bri_net_ptmp <<<<<<<<<<<<< context=fbze group = 1 channel => 4-5
pa postavio kao i na prvom kanalu, da je bri_cpe_ptmp
zatim odradio
/etc/init.d/asterisk stop /etc/init.d/asterisk start
nakon toga rade izlazne linije ...
Izmjenjeno od Ernad Husremović prije skoro 17 godina
da li je zapata.conf bio ovakav od jaskove instalacije ili si ga ti mijenjao u četvrtak ?
Izmjenjeno od Saša Vranić prije skoro 17 godina
Ne nisam ga mjenjao, nisam ni gledao u četvrtak da li je to izmjenio.
Ali znam da kada smo postavljali asterisk da sam to podesio prema rmlh podešenjima i da je bilo ovako kao sada...
e sada da li je u međuvremenu zttconf ili neka od komandi to razvalila ne znam
Izmjenjeno od Saša Vranić prije skoro 17 godina
Izmjenjeno od Saša Vranić prije skoro 17 godina
root@m1:/etc/asterisk# cat /proc/zaptel/1
Span 1: ztqoz/1/1 "duoBRI PCI ISDN Card 1 Span 1 [TE] (cardID 0) Layer 1 ACTIVATED (F7)" (MASTER) AMI/CCS
1 ztqoz1/1/1 Clear (In use)
2 ztqoz1/1/2 Clear (In use)
3 ztqoz1/1/3 HDLCFCS (In use)
root@m1:/etc/asterisk# cat /proc/zaptel/2
Span 2: ztqoz/1/2 "duoBRI PCI ISDN Card 1 Span 2 [TE] (cardID 0) Layer 1 ACTIVATED (F7)" AMI/CCS
4 ztqoz1/2/1 Clear (In use)
5 ztqoz1/2/2 Clear (In use)
6 ztqoz1/2/3 HDLCFCS (In use)
Izmjenjeno od Saša Vranić prije skoro 17 godina
dodao aktuelna podešenja asterisk-a #15233
Izmjenjeno od Saša Vranić prije skoro 17 godina
jutros kontaktirao Almu, dobio sam je odmah što je dobra stvar - znači da ulazni pozivi rade :) i pitao je jel bilo zastoja kakvih od jučer ????
kaže da je sve ok.
super, moguće da je ono bio problem... ali ko će ga znati.
Rekao joj da ako bude zastoj da odmah jave.
Izmjenjeno od Ernad Husremović prije skoro 17 godina
- Status promijenjeno iz Novo u Dodijeljeno
- Odgovorna osoba promijenjeno iz Saša Vranić u Ernad Husremović
- % završeno promijenjeno iz 0 u 90
Izmjenjeno od Ernad Husremović prije skoro 17 godina
juče i danas sam stalno pratio log-ove na fbze asterisku i par puta sam intervenisao restartovanjem asterisk-a
za potrebe testiranja napravio sam
root@m1:~/asterisk# cat test.call
Channel: zap/g1/061141311 #Channel: zap/g1/033269291 MaxRetries: 5 RetryTime: 30 WaitTime: 30 # # Once the call is answered, you must provide either an application/data # combination, or a context/extension/priority in which to start the PBX. # Context: fbze Application: VoicemailMain Data: 1234 #Extension: s #Priority: 1
pokretanjem ove skripte se vrši pozivanje sa asteriska fbze
root@m1:~/asterisk# cat test.sh
#!/bin/bash echo cp /root/asterisk/test.call /var/spool/asterisk/outgoing cp /root/asterisk/test.call /var/spool/asterisk/outgoing
Izmjenjeno od Ernad Husremović prije skoro 17 godina
danas na kraju dana sam uočio da vanjski poziv uvijek čučnjava na ZAP/4-1 a to je druga isdn kartica (kanal )
Naime ovako ide ta numeracija zaptel uređaja:- zap/1-1 (kartica 1 - telefon 200270 - isdn kanal/ 1)
- zap/2-1 (kartica 1 - telefon
||isdn kanal/ 2) - zap/4-1 (kartica 2 - telefon 440550 isdn kanal/ 1)
- zap/5-1 (kartica 3 - telefon 440550 isdn kanal/ 2)
naime 3 i 6 su D kanali na isdn karticama i oni se ne mogu koristiti kao voice
Izmjenjeno od Ernad Husremović prije skoro 17 godina
nakon silnih testiranja došao sam do rješenja
zaptel.conf
[channels] switchtype = euroisdn pridialplan = dynamic prilocaldialplan = local usecallingpres=yes echocancel = yes echocancelwhenbridged = yes echotraining = 100 signalling = bri_cpe_ptmp context=fbze group=1 context=fbze switchtype = euroisdn signalling = bri_cpe_ptmp channel => 1-2 group= context=default ; Span 2: ztqoz/1/2 "duoBRI PCI ISDN Card 1 Span 2 [TE] (cardID 0) Layer 1 ACTIVATED (F7)" AMI/CCS group=1 nationalprefix = 0 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< bez ovoga isdn broj 440-550 ne radi internationalprefix = 00 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< context=fbze switchtype = euroisdn signalling = bri_cpe_ptmp channel => 4-5 group= context=default
takođe je bitno napomenuti da ako bih na područje isdn kartice 1 (broj 200270) stavio
nationalprefix = 0 internationalprefix = 00
tada taj broj ne bi radio ?!
bilo kako bilo testirao sam rad na sljedeći način:- test call 03326921 (2 x) - zap/1-1 i zap/2-1
- test call 061141311 - javi se zap/4-1
dok stvari nisam podesio uvijek sam dobijao failed na ovom trećem pozivu
Izmjenjeno od Ernad Husremović prije skoro 17 godina
ovo praktično znači da se problem manifestovao onda kada su se pokušavali napraviti izlazni pozivi preko isdn kartice 2 (msn 440550)
Izmjenjeno od Ernad Husremović prije skoro 17 godina
biće od koristi da stavim šta je log pokazivao prije ovog podešenja
Extension Changed _41[blf] new state Idle for Notify User 50
-- Attempting call on zap/g1/061141311 for application VoicemailMain(1234) (Retry 1)
-- Requested transfer capability: 0x00 - SPEECH
-- Channel 0/1, span 2 got hangup request, cause 3
-- Hungup 'Zap/4-1'
[Sep 2 15:41:44] NOTICE[26988]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (1) Hangup
-- Attempting call on zap/g1/061141311 for application VoicemailMain(1234) (Retry 2)
-- Requested transfer capability: 0x00 - SPEECH
-- Channel 0/1, span 2 got hangup request, cause 3 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< error
-- Hungup 'Zap/4-1'
Izmjenjeno od Ernad Husremović prije skoro 17 godina
set caller id¶
druga stvar koju sam uočio je potencijalni problem sa caller id-om. kod fuelboss-a je pođonjena naša funkcija, ali to se kod njih ne može primjeniti jer kada ide preko isdn kartice 2 (zap span 2 - zap/4-1, zap/5-1) onda caller id mora biti 440550
// setovanje caller-id-a
macro set_caller_id() {
// if ( "${CHANNEL}" =~ "(SIP/31)" ) {
// Set(CALLERID(all)=032200270);
// } else {
// Set(CALLERID(all)=032200270);
// }
}
Izmjenjeno od Ernad Husremović prije više od 16 godina
- Naslov promijenjeno iz fbze, opet problem sa zauzećem izlaznih linija u fbze, zaptel opet problem sa zauzećem izlaznih linija
- Status promijenjeno iz Dodijeljeno u Zatvoreno
Izmjenjeno od Saša Vranić prije više od 16 godina
ovo sam uhvatio u /var/log/asterisk/messages u momentu testiranja ovih poziva
[Oct 9 10:25:56] WARNING[20522] app_dial.c: Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion) [Oct 9 10:26:30] WARNING[19411] chan_zap.c: zt_rec: Bad file descriptor [Oct 9 10:26:30] WARNING[19411] chan_zap.c: Unable to set audio mode on channel 4 to 1 [Oct 9 10:26:30] WARNING[19411] chan_zap.c: Unable to set audio mode on '4' [Oct 9 10:26:30] WARNING[19411] chan_zap.c: zt confmute(0) failed on channel 4: Bad file descriptor [Oct 9 10:26:30] WARNING[19411] chan_zap.c: Unable to restore gains: Bad file descriptor [Oct 9 10:26:30] WARNING[19411] chan_zap.c: Unable to set law on channel 4 to default [Oct 9 10:26:30] WARNING[19411] chan_zap.c: pri_disconnect failed [Oct 9 10:26:30] WARNING[19411] chan_zap.c: Unable to hangup line Zap/4-1 [Oct 9 10:26:30] WARNING[19411] chan_zap.c: Unable to disable echo cancellation on channel 4 [Oct 9 10:26:30] WARNING[19411] chan_zap.c: Failed to reset conferencing on channel 4! [Oct 9 10:26:30] WARNING[19411] chan_zap.c: Unable to disable echo cancellation on channel 4 [Oct 9 10:26:30] WARNING[19411] chan_zap.c: Unable to set audio mode on channel 4 to 0 [Oct 9 10:26:30] WARNING[20520] chan_zap.c: zt_rec: Bad file descriptor [Oct 9 10:26:30] WARNING[20520] chan_zap.c: Unable to set audio mode on channel 5 to 1 [Oct 9 10:26:30] WARNING[20520] chan_zap.c: Unable to set audio mode on '5' [Oct 9 10:26:30] WARNING[20520] chan_zap.c: zt confmute(0) failed on channel 5: Bad file descriptor [Oct 9 10:26:30] WARNING[20520] chan_zap.c: Unable to restore gains: Bad file descriptor [Oct 9 10:26:30] WARNING[20520] chan_zap.c: Unable to set law on channel 5 to default [Oct 9 10:26:30] WARNING[20520] chan_zap.c: pri_disconnect failed [Oct 9 10:26:30] WARNING[20520] chan_zap.c: Unable to hangup line Zap/5-1 [Oct 9 10:26:30] WARNING[20520] chan_zap.c: Unable to disable echo cancellation on channel 5 [Oct 9 10:26:30] WARNING[20520] chan_zap.c: Failed to reset conferencing on channel 5! [Oct 9 10:26:30] WARNING[20520] chan_zap.c: Unable to disable echo cancellation on channel 5 [Oct 9 10:26:30] WARNING[20520] chan_zap.c: Unable to set audio mode on channel 5 to 0 [Oct 9 10:26:30] ERROR[19278] chan_zap.c: Unable to open D-channel 3 (Device or resource busy) [Oct 9 10:26:30] ERROR[19278] chan_zap.c: Unable to start D-channel on span 1 [Oct 9 10:26:30] WARNING[19278] chan_zap.c: Reload channels from zap config failed! [Oct 9 10:26:51] WARNING[19278] chan_zap.c: Unable to specify channel 1: Device or resource busy [Oct 9 10:26:51] ERROR[19278] chan_zap.c: Unable to open channel 1: Device or resource busy here = 0, tmp->channel = 1, channel = 1 [Oct 9 10:26:51] ERROR[19278] chan_zap.c: Unable to register channel '1-2' [Oct 9 10:26:51] WARNING[19278] chan_zap.c: Reload channels from zap config failed! [Oct 9 10:27:10] NOTICE[20652] dnsmgr.c: Managed DNS entries will be refreshed every 120 seconds. [Oct 9 10:27:10] ERROR[20652] config.c: ********************************************************* [Oct 9 10:27:10] ERROR[20652] config.c: *********** YOU SHOULD REALLY READ THIS ERROR *********** [Oct 9 10:27:10] ERROR[20652] config.c: Future versions of Asterisk will treat a #include of a file that does not exist as an error, and will fail to load that configuration file. Please ensure that the file 'manager.d/*.conf' exists, even if it is empty. [Oct 9 10:27:10] ERROR[20652] config.c: *********** YOU SHOULD REALLY READ THIS ERROR *********** [Oct 9 10:27:10] ERROR[20652] config.c: *********************************************************
Akcije