system toolbox » voip

root@atom-2:~# mv freeswitch-dbg_1.0.4-1_amd64.deb dbg
root@atom-2:~# mv freeswitch-dev_1.0.4-1_amd64.deb dbg

dpkg -i *deb

Setting up freeswitch-codec-passthru-g729 (1.0.4-1) ...
Setting up freeswitch-lang-de (1.0.4-1) ...
Setting up freeswitch-lang-en (1.0.4-1) ...
Setting up freeswitch-lang-es (1.0.4-1) ...
Setting up freeswitch-lang-fr (1.0.4-1) ...
Setting up freeswitch-lang-it (1.0.4-1) ...
Setting up freeswitch-lang-nl (1.0.4-1) ...
Setting up freeswitch-lang-ru (1.0.4-1) ...
Setting up freeswitch-lua (1.0.4-1) ...
Setting up freeswitch-perl (1.0.4-1) ...
Setting up freeswitch-sounds-en-us-callie-16000 (1.0.4-1) ...
Setting up freeswitch-sounds-en-us-callie-32000 (1.0.4-1) ...
Setting up freeswitch-sounds-en-us-callie-48000 (1.0.4-1) ...
Setting up freeswitch-sounds-en-us-callie-8000 (1.0.4-1) ...
Setting up freeswitch-sounds-music-8000 (1.0.4-1) ...
Setting up freeswitch-sounds-ru-ru-elena-16000 (1.0.4-1) ...
Setting up freeswitch-sounds-ru-ru-elena-32000 (1.0.4-1) ...
Setting up freeswitch-sounds-ru-ru-elena-48000 (1.0.4-1) ...
Setting up freeswitch-sounds-ru-ru-elena-8000 (1.0.4-1) ...
Setting up freeswitch-spidermonkey (1.0.4-1) ...
Setting up freeswitch-codec-passthru-amr (1.0.4-1) ...
Setting up freeswitch-codec-passthru-g7231 (1.0.4-1) ...

root@atom-2:~# usermod -s /bin/bash freeswitch

conf/vars.xml

  <X-PRE-PROCESS cmd="set" data="internal_sip_port=5065"/>
  <X-PRE-PROCESS cmd="set" data="internal_tls_port=5066"/>

root@atom-2:~# free -m

             total       used       free     shared    buffers     cached
Mem:           991        483        507          0         36         43
-/+ buffers/cache:        404        587
Swap:         2903          6       2897

freeswitch@atom-2:~$ bin/freeswitch

root@atom-2:~# free -m

             total       used       free     shared    buffers     cached
Mem:           991        509        481          0         39         46
-/+ buffers/cache:        424        567
Swap:         2903          6       2897

2009-11-02 23:43:00.606760 [CONSOLE] switch_core.c:1498 
FreeSWITCH Version 1.0.trunk (hacked) Started.
Max Sessions[1000]
Session Rate[30]
SQL [Enabled]
freeswitch@atom-2> 

• shutdown

root@atom-2:~# sudo apt-get install lib32stdc++6 lib32asound2 ia32-libs libc6-i386 lib32gcc1 lib32z1 lib32bz2-1.0 lib32v4l-0 lib32ncurses5

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Predloženi paketi:
  lib32asound2-plugins
Slijedeći NOVI paketi će biti instalirani:
  ia32-libs lib32asound2 lib32bz2-1.0 lib32gcc1 lib32ncurses5 lib32stdc++6
  lib32v4l-0 lib32z1 libc6-i386
0 upgraded, 9 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
Need to get 34,0MB of archives.

sudo dpkg -i skype.deb

pokrenuo skype kao brinout i setovao hernad_bringout account

bringout@atom-2:~/.Skype/hernad_bringout

http://wiki.freeswitch.org/wiki/Skypiax_Skype_Endpoint_and_Trunk

kad pokrenem skype client

root@atom-2:~# free -m

             total       used       free     shared    buffers     cached
Mem:           991        907         84          0         46        395
-/+ buffers/cache:        464        526
Swap:         2903          6       2897

http://wiki.freeswitch.org/wiki/Skypiax_Skype_Endpoint_and_Trunk

Multiple concurrent incoming calls to the same Skype username¶

This solution, based on "transfer" the call to another Skype username (running on the same machine) works on both Windows and on Linux. For a Linux-only solution, based on running multiple instances of the same Skype username, see below

Let's say you want to be able to serve multiple concurrent incoming calls to the Skype username "skypiax1" (as in: Alice uses Skype to call the Skype user "skypiax1", concurrently Bob uses Skype to call the Skype user "skypiax1", both Alice and Bob are concurrently served by FS).

You setup multiple skypiax interfaces on FS, as many interfaces as the max number of concurrent incoming calls you want to serve.

Each skypiax interface will have its own Skype client running, each one with its own Skype user login.

Let's say you want to serve a max of 3 concurrent incoming calls, you'll setup three skypiax interface (100 concurrent calls, 100 skypiax interfaces). One of those three interfaces will be logged into the Skype network using the Skype username you want to use to answer all the incoming calls.

So, one interface will be logged into Skype network as "skypiax1". Let's say that the other two interfaces will be logged into the Skype network as "skypiax2" and "skypiax3", but they could be logged as any other Skype username, as long as they are all different and different from "skypiax1" (it's not possible to have more than one Skype client instance using the same Skype username on the same machine, at least on Linux).

When the first incoming call to the Skype username "skypiax1" is received, is served as you would expect by the interface logged as "skypiax1".

If another call for "skypiax1" is incoming while that interface is busy into a call (incoming or outbound), the "skypiax1" interface will transfer the incoming call to the first other idle skypiax interface it finds (eg: interface2 or interface3). The calling user will not have to do nothing for this, and this is completely transparent for Windows and Linux users, while MacOSX users will see into their client that the called party is changed from "skypiax1" to, say, "skypiax3", but they too do not have to do nothing.

And so on until all the skypiax interfaces available are busy. At that point, further incoming calls will be rejected until one skypiax interface exit from the call it is into, and will be available to answer.

root@atom-2:~# sudo apt-get install xvfb

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Slijedeći dodatni paketi će biti instalirani:
  xserver-common
Slijedeći NOVI paketi će biti instalirani:
  xserver-common xvfb
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 1680kB of archives.
After this operation, 2879kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://archive.sigma-com.net karmic/main xserver-common 2:1.6.4-2ubuntu4 [74,6kB]
Get:2 http://archive.sigma-com.net karmic/main xvfb 2:1.6.4-2ubuntu4 [1605kB]
Fetched 1680kB in 5s (291kB/s) 
Selecting previously deselected package xserver-common.
(Reading database ... 126103 files and directories currently installed.)
Unpacking xserver-common (from .../xserver-common_2%3a1.6.4-2ubuntu4_all.deb) ...
Selecting previously deselected package xvfb.
Unpacking xvfb (from .../xvfb_2%3a1.6.4-2ubuntu4_amd64.deb) ...
Processing triggers for man-db ...
Setting up xserver-common (2:1.6.4-2ubuntu4) ...
Setting up xvfb (2:1.6.4-2ubuntu4) ...

start_skype.sh

# remember to add here the removing of all the installed snd-* modules, so you're sure only the snd-dummy driver will be around
# rmmod snd_hda_intel
modprobe  -r snd-dummy
modprobe  -r snd_hda_codec_realtek

# if you DO NOT USE the custom ALSA device we provide, you need three "standard" dummy soundcard for 20 Skype client instances, because each "standard" dummy soundcard can handle a max of 8 Skype instances
# the enable= module parameter tells how many cards to start. For each additional card, add a comma and a 1
# manually configure the first 8 Skype client instances to use the hw:Dummy_0, the next 8 instances to use hw:Dummy_1, etc for all three devices (Play, Capture, Ring)
modprobe snd-dummy # enable=1,1,1
sleep 3

#start the fake X server on a given port
/usr/bin/Xvfb :101 -ac &
sleep 3

# start a Skype client instance that will connect to the X server above, and will login to the Skype network using the 'username password' you send to it on stdin. Here xxxx would be the password and skypiax1 the username
su root -c "/bin/echo 'bringout_sa xxxxxxxxxxxxxxxx'| DISPLAY=:101  /usr/bin/skype --pipelogin &" 

sleep 7

 /usr/bin/Xvfb :102 -ac &
sleep 3

su root -c "/bin/echo 'bringout_sa_2 xxxxxxxxxxxxxxxx'| DISPLAY=:102  /usr/bin/skype --pipelogin &" 

sleep 7

/usr/bin/Xvfb :103 -ac &
sleep 3

su root -c "/bin/echo 'bringout_sa_3 xxxxxxxxxxxxxxxx'| DISPLAY=:103  /usr/bin/skype --pipelogin &" 

bringout@atom-2:~$ sudo start_skype.sh

[dix] Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
[config/dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.262" is not allowed to own the service "org.x.config.display101" due to security policies in the configuration file)
(EE) config/hal: NewInputDeviceRequest failed (2)
(EE) config/hal: NewInputDeviceRequest failed (2)
(EE) config/hal: NewInputDeviceRequest failed (2)
[dix] Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
[config/dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.264" is not allowed to own the service "org.x.config.display102" due to security policies in the configuration file)
(EE) config/hal: NewInputDeviceRequest failed (2)
(EE) config/hal: NewInputDeviceRequest failed (2)
(EE) config/hal: NewInputDeviceRequest failed (2)
[dix] Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
[config/dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.266" is not allowed to own the service "org.x.config.display103" due to security policies in the configuration file)
(EE) config/hal: NewInputDeviceRequest failed (2)
(EE) config/hal: NewInputDeviceRequest failed (2)
(EE) config/hal: NewInputDeviceRequest failed (2)

bringout@atom-2:~$ ps ax | grep skype | grep -v grep

 7477 pts/4    Sl     0:04 /usr/bin/skype --pipelogin
 7520 pts/4    Sl     0:04 /usr/bin/skype --pipelogin
 7571 pts/4    Sl     0:04 /usr/bin/skype --pipelogin
 7610 pts/2    S+     0:00 vi /usr/local/bin/start_skype.sh

bringout@atom-2:~$ ps ax | grep Xvfb | grep -v grep

 7463 pts/4    S      0:00 /usr/bin/Xvfb :101 -ac
 7506 pts/4    S      0:00 /usr/bin/Xvfb :102 -ac
 7557 pts/4    S      0:00 /usr/bin/Xvfb :103 -ac

skype config directory¶

root@atom-2:~/configs# apt-get install libx11-dev

gcc -Wall -ggdb skypiax_auth.c -o skypiax_auth -lX11

root@atom-2:~/configs# gcc -Wall -ggdb skypiax_auth.c -o skypiax_auth -lX11
root@atom-2:~/configs# cp skypiax_auth /usr/local/sbin

bringout@desk-c2:~/devel/work/freeswitch/src/mod/endpoints/mod_skypiax/configs$ ./a.out

Skype instance found on display ':0.0', with id #65011777
RECEIVED==> ERROR 68
RECEIVED==> OK

znači skypiax_auth pokrenuo na desk-c2 a skype na remote mašini

bringout@atom-2:~/.Skype/hernad_bringout$ cat /proc/asound/cards

 0 [Dummy          ]: Dummy - Dummy
                      Dummy 1

bringout@atom-2:~/.Skype/hernad_bringout$ sudo apt-get remove pulseaudio

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Slijedeći paketi će biti UKLONJENI:
  libcanberra-pulse pulseaudio pulseaudio-esound-compat
  pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-udev
  pulseaudio-module-x11

bringout@atom-2:~$ sudo apt-get remove bluetooth

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Slijedeći paketi će biti UKLONJENI:
  bluetooth bluez-utils
0 upgraded, 0 newly installed, 2 to remove and 8 not upgraded.
After this operation, 168kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 127067 files and directories currently installed.)
Removing bluez-utils ...
Removing bluetooth ...

pulseaudio / alsa na atom-2 ne radi ?!

pulseaudio, alsa test on desk-c2¶

bringout@desk-c2:~/devel/work$ pacmd list-cards

Welcome to PulseAudio! Use "help" for usage information.
>>> 2 card(s) available.
    index: 0
    name: <alsa_card.pci-0000_00_1b.0>
    driver: <module-alsa-card.c>
    owner module: 4
    properties:
        alsa.card = "0" 
        alsa.card_name = "HDA Intel" 
        alsa.long_card_name = "HDA Intel at 0xf9ff8000 irq 22" 
        alsa.driver_name = "snd_hda_intel" 
        device.bus_path = "pci-0000:00:1b.0" 
        sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" 
        device.bus = "pci" 
        device.vendor.id = "8086" 
        device.vendor.name = "Intel Corporation" 
        device.product.id = "293e" 
        device.product.name = "82801I (ICH9 Family) HD Audio Controller" 
        device.form_factor = "internal" 
        device.string = "0" 
        device.description = "Internal Audio" 
        module-udev-detect.discovered = "1" 
        device.icon_name = "audio-card-pci" 
    profiles:
        output:analog-stereo: Analog Stereo Output (priority 6000)
        output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060)
        output:analog-surround-40: Analog Surround 4.0 Output (priority 700)
        output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 760)
        output:analog-surround-41: Analog Surround 4.1 Output (priority 800)
        output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 860)
        output:analog-surround-50: Analog Surround 5.0 Output (priority 700)
        output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 760)
        output:analog-surround-51: Analog Surround 5.1 Output (priority 800)
        output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 860)
        output:analog-surround-71: Analog Surround 7.1 Output (priority 700)
        output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (priority 760)
        output:iec958-stereo: Digital Stereo Duplex (IEC958) (priority 5500)
        output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5560)
        input:analog-stereo: Analog Stereo Input (priority 60)
        off: Off (priority 0)
    active profile: <output:analog-stereo+input:analog-stereo>
    sinks:
        alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Internal Audio Analog Stereo
    sources:
        alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Internal Audio Analog Stereo
        alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Internal Audio Analog Stereo
    index: 1
    name: <alsa_card.platform-snd_dummy.0>
    driver: <module-alsa-card.c>
    owner module: 19
    properties:
        alsa.card = "1" 
        alsa.card_name = "Dummy" 
        alsa.long_card_name = "Dummy 1" 
        device.bus_path = "platform-snd_dummy.0" 
        sysfs.path = "/devices/platform/snd_dummy.0/sound/card1" 
        device.string = "1" 
        device.description = "Dummy" 
        module-udev-detect.discovered = "1" 
        device.icon_name = "audio-card" 
    profiles:
        output:analog-mono: Analog Mono Output (priority 100)
        output:analog-mono+input:analog-mono: Analog Mono Duplex (priority 101)
        output:analog-mono+input:analog-stereo: Analog Mono Output + Analog Stereo Input (priority 160)
        output:analog-stereo: Analog Stereo Output (priority 6000)
        output:analog-stereo+input:analog-mono: Analog Stereo Output + Analog Mono Input (priority 6001)
        output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060)
        input:analog-mono: Analog Mono Input (priority 1)
        input:analog-stereo: Analog Stereo Input (priority 60)
        off: Off (priority 0)
    active profile: <output:analog-stereo+input:analog-stereo>
    sinks:
        alsa_output.platform-snd_dummy.0.analog-stereo/#1: Dummy Analog Stereo
    sources:
        alsa_output.platform-snd_dummy.0.analog-stereo.monitor/#2: Monitor of Dummy Analog Stereo
        alsa_input.platform-snd_dummy.0.analog-stereo/#3: Dummy Analog Stereo

bringout@atom-2:~$ sudo apt-get install pulseaudio-module-gconf

bringout@atom-2:/etc/modprobe.d$ pulseaudio -vvvvvvvvvvvvv

..
W: main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-U7wItecgPg: Connection refused
I: main.c: Daemon startup complete.
D: module-console-kit.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
..

bringout@atom-2:~$ cat /etc/default/pulseaudio

# Start the PulseAudio sound server in system mode.
# (enables the pulseaudio init script - requires that users be in the
# pulse-access group)
# System mode is not the recommended way to run PulseAudio as it has some
# limitations (such as no shared memory access) and could potentially allow
# users to disconnect or redirect each others' audio streams. The
# recommended way to run PulseAudio is as a per-session daemon. For GNOME
# sessions in Ubuntu, /etc/X11/Xsession.d/70pulseaudio and
# /usr/bin/pulse-session handle this function of automatically starting 
# PulseAudio on login. For other sessions, you can simply start PulseAudio
# with "pulseaudio --daemonize".
# 0 = don't start, 1 = start
PULSEAUDIO_SYSTEM_START=1 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< bilo 0

# Prevent users from dynamically loading modules into the PulseAudio sound
# server. Dynamic module loading enhances the flexibilty of the PulseAudio
# system, but may pose a security risk.
# 0 = no, 1 = yes
DISALLOW_MODULE_LOADING=1

bringout@atom-2:~$ sudo alsa force-unload

lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/bringout/.gvfs
      Output information may be incomplete.
Terminating processes: 2768lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/bringout/.gvfs
      Output information may be incomplete.
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/bringout/.gvfs
      Output information may be incomplete.
.
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/bringout/.gvfs
      Output information may be incomplete.
Unloading ALSA sound driver modules: snd-dummy snd-hda-codec-realtek snd-hda-intel snd-hda-codec snd-hwdep snd-pcm-oss snd-mixer-oss snd-pcm snd-seq-dummy snd-seq-oss snd-seq-midi snd-rawmidi snd-seq-midi-event snd-seq snd-timer snd-seq-device snd-page-alloc (failed: modules still loaded: snd-hda-codec-realtek snd-hda-codec snd-hwdep snd-pcm snd-timer snd-page-alloc)

bringout@atom-2:~$ sudo apt-get remove cups

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Slijedeći paketi će biti UKLONJENI:
  bluez-cups cups cups-driver-gutenprint foo2zjs foomatic-db
  foomatic-db-engine ghostscript-cups hpijs hplip openprinting-ppds pxljr
  splix
0 upgraded, 0 newly installed, 12 to remove and 8 not upgraded.
After this operation, 41,5MB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 127059 files and directories currently installed.)
Removing bluez-cups ...
Removing splix ...
Removing pxljr ...
Removing openprinting-ppds ...
Removing hpijs ...
Removing hplip ...
Removing cups-driver-gutenprint ...
 * Reloading Common Unix Printing System: cupsd                          [ OK ] 
Removing ghostscript-cups ...
Removing foo2zjs ...
Removing foomatic-db-engine ...
Removing foomatic-db ...
Removing cups ...
 * Stopping Common Unix Printing System: cupsd                           [ OK ] 
Processing triggers for man-db ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Processing triggers for desktop-file-utils ...
Processing triggers for doc-base ...
Processing 1 removed doc-base file(s)...
Registering documents with scrollkeeper...
Processing triggers for ufw ...
Processing triggers for sreadahead ...

bringout@atom-2:~$ sudo apt-get remove evince libpoppler-glib4 libpoppler5

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Slijedeći paketi će biti UKLONJENI:
  evince gimp libpoppler-glib4 libpoppler5 poppler-utils
0 upgraded, 0 newly installed, 5 to remove and 5 not upgraded.
After this operation, 22,7MB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 121713 files and directories currently installed.)
Removing evince ...
Removing gimp ...
Removing libpoppler-glib4 ...
Removing poppler-utils ...
Removing libpoppler5 ...
Processing triggers for desktop-file-utils ...
Processing triggers for hicolor-icon-theme ...
Processing triggers for man-db ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place

bringout@atom-2:/dev/snd$ sudo apt-get install alsa-base --reinstall

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 5 not upgraded.
Need to get 270kB of archives.
After this operation, 0B of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://archive.sigma-com.net karmic/main alsa-base 1.0.20+dfsg-1ubuntu5 [270kB]
Fetched 270kB in 0s (404kB/s)                           
(Reading database ... 121193 files and directories currently installed.)
Preparing to replace alsa-base 1.0.20+dfsg-1ubuntu5 (using .../alsa-base_1.0.20+dfsg-1ubuntu5_all.deb) ...
Unpacking replacement alsa-base ...
Setting up alsa-base (1.0.20+dfsg-1ubuntu5) ...

bringout@atom-2:/dev/snd$ cat /proc/asound/version

Advanced Linux Sound Architecture Driver Version 1.0.20.

bringout@atom-2:/dev/snd$ sudo apt-get install ubuntu-desktop

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Slijedeći dodatni paketi će biti instalirani:
  bluetooth bluez-cups bluez-utils cups cups-driver-gutenprint evince foo2zjs
  foomatic-db foomatic-db-engine gdm gdm-guest-session ghostscript-cups gimp
  hpijs hplip indicator-applet-session indicator-session latex-xft-fonts
  libpoppler-glib4 libpoppler5 libxvmc1 openoffice.org-base-core
  openoffice.org-calc openoffice.org-common openoffice.org-core
  openoffice.org-draw openoffice.org-emailmerge openoffice.org-gnome
  openoffice.org-gtk openoffice.org-help-en-us openoffice.org-impress
  openoffice.org-math openoffice.org-writer openprinting-ppds poppler-utils
  pulseaudio-module-bluetooth pxljr python-uno splix xfonts-mathml xorg
  xserver-xorg xserver-xorg-core xserver-xorg-input-all
  xserver-xorg-input-evdev xserver-xorg-input-mouse
  xserver-xorg-input-synaptics xserver-xorg-input-vmmouse
  xserver-xorg-input-wacom xserver-xorg-video-all xserver-xorg-video-apm
  xserver-xorg-video-ark xserver-xorg-video-ati xserver-xorg-video-chips
  xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-i128
  xserver-xorg-video-intel xserver-xorg-video-mach64 xserver-xorg-video-mga
  xserver-xorg-video-neomagic xserver-xorg-video-nv
  xserver-xorg-video-openchrome xserver-xorg-video-r128
  xserver-xorg-video-radeon xserver-xorg-video-rendition xserver-xorg-video-s3
  xserver-xorg-video-s3virge xserver-xorg-video-savage
  xserver-xorg-video-siliconmotion xserver-xorg-video-sis
  xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-trident
  xserver-xorg-video-tseng xserver-xorg-video-v4l xserver-xorg-video-vesa
  xserver-xorg-video-vmware xserver-xorg-video-voodoo
Predloženi paketi:
  cups-ppdc xpdf-korean xpdf-japanese xpdf-chinese-traditional
  xpdf-chinese-simplified cups-pdf gutenprint-doc gutenprint-locales unrar
  poppler-data hannah-foo2zjs hplip-cups m2300w openprinting-ppds-extra cjet
  foomatic-db-hpijs foomatic-db-gutenprint foomatic-gui uswsusp gok
  gimp-help-en gimp-help libgimp-perl gimp-data-extras hpijs-ppds hplip-doc
  kdeprint gtklp xpp hplip-gui openoffice.org-base
  openoffice.org-style-industrial openoffice.org-style-hicontrast
  openoffice.org-style-tango openoffice.org-style-crystal
  openoffice.org-style-oxygen openoffice.org-evolution
  openoffice.org-java-common openoffice.org-gcj
  openoffice.org-filter-binfilter default-jre gcj-jre java-gcj-compat
  openjdk-6-jre sun-java5-jre sun-java6-jre java5-runtime jre
  ttf-mathematica4.1 xorg-docs gpointing-device-settings touchfreeze
  wacom-tools firmware-linux
Slijedeći NOVI paketi će biti instalirani:
  bluetooth bluez-cups bluez-utils cups cups-driver-gutenprint evince foo2zjs
  foomatic-db foomatic-db-engine gdm gdm-guest-session ghostscript-cups gimp
  hpijs hplip indicator-applet-session indicator-session latex-xft-fonts
  libpoppler-glib4 libpoppler5 libxvmc1 openoffice.org-base-core
  openoffice.org-calc openoffice.org-common openoffice.org-core
  openoffice.org-draw openoffice.org-emailmerge openoffice.org-gnome
  openoffice.org-gtk openoffice.org-help-en-us openoffice.org-impress
  openoffice.org-math openoffice.org-writer openprinting-ppds poppler-utils
  pulseaudio-module-bluetooth pxljr python-uno splix ubuntu-desktop
  xfonts-mathml xorg xserver-xorg xserver-xorg-core xserver-xorg-input-all
  xserver-xorg-input-evdev xserver-xorg-input-mouse
  xserver-xorg-input-synaptics xserver-xorg-input-vmmouse
  xserver-xorg-input-wacom xserver-xorg-video-all xserver-xorg-video-apm
  xserver-xorg-video-ark xserver-xorg-video-ati xserver-xorg-video-chips
  xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-i128
  xserver-xorg-video-intel xserver-xorg-video-mach64 xserver-xorg-video-mga
  xserver-xorg-video-neomagic xserver-xorg-video-nv
  xserver-xorg-video-openchrome xserver-xorg-video-r128
  xserver-xorg-video-radeon xserver-xorg-video-rendition xserver-xorg-video-s3
  xserver-xorg-video-s3virge xserver-xorg-video-savage
  xserver-xorg-video-siliconmotion xserver-xorg-video-sis
  xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-trident
  xserver-xorg-video-tseng xserver-xorg-video-v4l xserver-xorg-video-vesa
  xserver-xorg-video-vmware xserver-xorg-video-voodoo
0 upgraded, 80 newly installed, 0 to remove and 0 not upgraded.
Need to get 90,3MB of archives.
After this operation, 355MB of additional disk space will be used.

opet imam onaj problem

Failed to restore crtc configuration

bringout@atom-2:~$ sudo apt-get remove xserver-xorg-core

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Slijedeći paketi će biti UKLONJENI:
  xserver-xorg xserver-xorg-core xserver-xorg-input-all
  xserver-xorg-input-evdev xserver-xorg-input-mouse
  xserver-xorg-input-synaptics xserver-xorg-input-vmmouse
  xserver-xorg-input-wacom xserver-xorg-video-all xserver-xorg-video-apm
  xserver-xorg-video-ark xserver-xorg-video-ati xserver-xorg-video-chips
  xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-i128
  xserver-xorg-video-intel xserver-xorg-video-mach64 xserver-xorg-video-mga
  xserver-xorg-video-neomagic xserver-xorg-video-nv
  xserver-xorg-video-openchrome xserver-xorg-video-r128
  xserver-xorg-video-radeon xserver-xorg-video-rendition xserver-xorg-video-s3
  xserver-xorg-video-s3virge xserver-xorg-video-savage
  xserver-xorg-video-siliconmotion xserver-xorg-video-sis
  xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-trident
  xserver-xorg-video-tseng xserver-xorg-video-v4l xserver-xorg-video-vesa
  xserver-xorg-video-vmware xserver-xorg-video-voodoo

bringout@atom-2:/etc/modprobe.d$ sudo apt-get purge pulseaudio

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Sljedeći paketi su automatski instalirani i više nisu potrebni:
  libxvmc1
Use 'apt-get autoremove' to remove them.
Slijedeći paketi će biti UKLONJENI:
  pulseaudio* pulseaudio-esound-compat* pulseaudio-module-bluetooth*
  pulseaudio-module-gconf* pulseaudio-module-udev* pulseaudio-module-x11*
0 upgraded, 0 newly installed, 6 to remove and 0 not upgraded.
After this operation, 5267kB disk space will be freed.
Do you want to continue [Y/n]? y

bringout@atom-2:/etc/modprobe.d$ sudo apt-get remove pulseaudio-module-x11

Čitam spiskove paketa... Done
Gradim stablo zavisnosti        
Reading state information... Done
Sljedeći paketi su automatski instalirani i više nisu potrebni:
  libxvmc1
Use 'apt-get autoremove' to remove them.
Slijedeći paketi će biti UKLONJENI:
  pulseaudio-module-x11
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 152kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 130569 files and directories currently installed.)
Removing pulseaudio-module-x11 ...

howto disable pulseaudio

bringout@desk-c2:~$ echo autospawn=no|tee -a /home/bringout/.pulse/client.conf
autospawn=no
bringout@desk-c2:~$ vi /home/bringout/.pulse/client.conf
bringout@desk-c2:~$ ls /home/bringout/.pulse
.pulse/        .pulse-cookie  
bringout@desk-c2:~$ touch ~/.pulse_a11y_nostart
bringout@desk-c2:~$ sudo chmod 600 /usr/bin/pulse-session 

bringout@desk-c2:~$ sudo killall pulseaudio

bringout@desk-c2:~$ aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

bringout@desk-c2:~$ sudo modprobe -r snd-hda-intel

bringout@desk-c2:~$ aplay -l

aplay: device_list:223: no soundcards found...

bringout@desk-c2:~$ sudo modprobe snd-dummy

bringout@desk-c2:~$ aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: Dummy [Dummy], device 0: Dummy PCM [Dummy PCM]
  Subdevices: 8/8
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
  Subdevice #7: subdevice #7

bringout@atom-2:~$ sudo apt-get purge pulseaudio

bringout@atom-2:~$ sudo apt-get purge pulseaudio

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Sljedeći paketi su automatski instalirani i više nisu potrebni:
  libxvmc1
Use 'apt-get autoremove' to remove them.
Slijedeći paketi će biti UKLONJENI:
  pulseaudio* pulseaudio-esound-compat* pulseaudio-module-udev*
0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded.
After this operation, 4686kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 130589 files and directories currently installed.)
Removing pulseaudio-esound-compat ...
Removing pulseaudio ...
 * PulseAudio configured for per-user sessions
Purging configuration files for pulseaudio ...
Removing pulseaudio-module-udev ...
Processing triggers for man-db ...
Processing triggers for sreadahead ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
bringout@atom-2:~$ sudo apt-get purge alsa
Čitam spiskove paketa... Done
Gradim stablo zavisnosti        
Reading state information... Done
Note, selecting alsa-base instead of alsa
Sljedeći paketi su automatski instalirani i više nisu potrebni:
  libxvmc1
Use 'apt-get autoremove' to remove them.
Slijedeći paketi će biti UKLONJENI:
  alsa-base*
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 479kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 130470 files and directories currently installed.)
Removing alsa-base ...
Purging configuration files for alsa-base ...

nakon restarta root korisnik:

root@atom-2:~# aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

bringout@atom-2:~$ aplay -l

aplay: device_list:223: no soundcards found...

root ima pristup ali bringout nema ???

bringout@atom-2:~$ sudo usermod -a -G audio bringout

ali opet ništa

bringout@atom-2:~$ sudo aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Dummy [Dummy], device 0: Dummy PCM [Dummy PCM]
  Subdevices: 8/8
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
  Subdevice #7: subdevice #7

trebam upgrade na alsa 1.0.21 ?

ma garant ne trebam ali sam to započeo ...

bringout@atom-2:~/alsa/alsa-driver-1.0.21$ make

...
utils/link-modules /home/bringout/alsa/alsa-driver-1.0.21

ALSA modules were successfully compiled.

nakon restarta ipak bringout pristupa alisa

bringout@atom-2:~$ aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

ponovo bluetooth out

bringout@atom-2:~$ sudo apt-get remove bluetooth

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Sljedeći paketi su automatski instalirani i više nisu potrebni:
  libxvmc1
Use 'apt-get autoremove' to remove them.
Slijedeći paketi će biti UKLONJENI:
  bluetooth bluez-utils
0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded.
After this operation, 168kB disk space will be freed.
Do you want to continue [Y/n]? y

root@atom-2:~# tail /etc/modules

loop
lp
rtc

snd-dummy

root@atom-2:~# /usr/local/bin/start_skype.sh

[dix] Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
[config/dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.155" is not allowed to own the service "org.x.config.display101" due to security policies in the configuration file)
(EE) config/hal: NewInputDeviceRequest failed (2)
(EE) config/hal: NewInputDeviceRequest failed (2)
(EE) config/hal: NewInputDeviceRequest failed (2)

[dix] Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
[config/dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.157" is not allowed to own the service "org.x.config.display102" due to security policies in the configuration file)
(EE) config/hal: NewInputDeviceRequest failed (2)
(EE) config/hal: NewInputDeviceRequest failed (2)
(EE) config/hal: NewInputDeviceRequest failed (2)

...

root@atom-2:~# ps ax | grep skype

 3011 pts/1    Sl     0:02 /usr/bin/skype --pipelogin
 3048 pts/1    Sl     0:02 /usr/bin/skype --pipelogin
 3085 pts/1    Sl     0:02 /usr/bin/skype --pipelogin

evo freeswitch procesi:

root@atom-2:~# ps -aufreeswitch

  PID TTY          TIME CMD
 2742 ?        00:00:03 sshd
 2743 pts/2    00:00:00 bash
 2758 pts/2    00:00:00 dbus-launch
 2759 ?        00:00:00 dbus-daemon
 2997 pts/1    00:00:00 Xvfb
 3011 pts/1    00:00:02 skype
 3023 pts/1    00:00:00 dbus-launch
 3024 ?        00:00:00 dbus-daemon
 3034 pts/1    00:00:00 Xvfb
 3048 pts/1    00:00:02 skype
 3060 pts/1    00:00:00 dbus-launch
 3061 ?        00:00:00 dbus-daemon
 3071 pts/1    00:00:00 Xvfb
 3085 pts/1    00:00:02 skype
 3096 pts/1    00:00:00 dbus-launch
 3097 ?        00:00:00 dbus-daemon
 3129 pts/1    00:00:00 ps

freeswitch@atom-2> load mod_skypiax

2009-11-03 17:32:20.762479 [WARNING] mod_skypiax.c:1306 rev [(nil)|37     ][WARNINGA  1306 ][interface1][-1, 0, 0] STARTING interface_id=1
2009-11-03 17:32:20.962739 [NOTICE] mod_skypiax.c:1329 rev [(nil)|37     ][NOTICA  1329 ][interface1][-1, 0, 0] WAITING roughly 10 seconds to find a running Skype client and connect to its SKYPE API for interface_id=1
2009-11-03 17:32:20.962739 [NOTICE] mod_skypiax.c:1338 rev [(nil)|37     ][NOTICA  1338 ][interface1][-1, 0, 0] Found a running Skype client, connected to its SKYPE API for interface_id=1, waiting 60 seconds for CURRENTUSERHANDLE==bringout_sa
2009-11-03 17:32:20.962739 [WARNING] mod_skypiax.c:1357 rev [(nil)|37     ][WARNINGA  1357 ][interface1][-1, 0, 0] Interface_id=1 is now STARTED, the Skype client to which we are connected gave us the correct CURRENTUSERHANDLE (bringout_sa)
2009-11-03 17:32:20.963966 [WARNING] mod_skypiax.c:1306 rev [(nil)|37     ][WARNINGA  1306 ][interface2][-1, 0, 0] STARTING interface_id=2
2009-11-03 17:32:21.165425 [NOTICE] mod_skypiax.c:1329 rev [(nil)|37     ][NOTICA  1329 ][interface2][-1, 0, 0] WAITING roughly 10 seconds to find a running Skype client and connect to its SKYPE API for interface_id=2
2009-11-03 17:32:21.165425 [NOTICE] mod_skypiax.c:1338 rev [(nil)|37     ][NOTICA  1338 ][interface2][-1, 0, 0] Found a running Skype client, connected to its SKYPE API for interface_id=2, waiting 60 seconds for CURRENTUSERHANDLE==bringout_sa_2
2009-11-03 17:32:21.165425 [WARNING] mod_skypiax.c:1357 rev [(nil)|37     ][WARNINGA  1357 ][interface2][-1, 0, 0] Interface_id=2 is now STARTED, the Skype client to which we are connected gave us the correct CURRENTUSERHANDLE (bringout_sa_2)
2009-11-03 17:32:21.165425 [WARNING] mod_skypiax.c:1306 rev [(nil)|37     ][WARNINGA  1306 ][interface3][-1, 0, 0] STARTING interface_id=3
2009-11-03 17:32:21.367463 [NOTICE] mod_skypiax.c:1329 rev [(nil)|37     ][NOTICA  1329 ][interface3][-1, 0, 0] WAITING roughly 10 seconds to find a running Skype client and connect to its SKYPE API for interface_id=3
2009-11-03 17:32:21.367463 [NOTICE] mod_skypiax.c:1338 rev [(nil)|37     ][NOTICA  1338 ][interface3][-1, 0, 0] Found a running Skype client, connected to its SKYPE API for interface_id=3, waiting 60 seconds for CURRENTUSERHANDLE==bringout_sa_3
2009-11-03 17:32:21.368536 [WARNING] mod_skypiax.c:1357 rev [(nil)|37     ][WARNINGA  1357 ][interface3][-1, 0, 0] Interface_id=3 is now STARTED, the Skype client to which we are connected gave us the correct CURRENTUSERHANDLE (bringout_sa_3)
API CALL [load(mod_skypiax)] output:
+OK

freeswitch@atom-2> 2009-11-03 17:32:21.368536 [CONSOLE] switch_loadable_module.c:889 Successfully Loaded [mod_skypiax]
2009-11-03 17:32:21.368536 [NOTICE] switch_loadable_module.c:142 Adding Endpoint 'skypiax'
2009-11-03 17:32:21.368536 [NOTICE] switch_loadable_module.c:270 Adding API Function 'sk'
2009-11-03 17:32:21.368536 [NOTICE] switch_loadable_module.c:270 Adding API Function 'skypiax'
2009-11-03 17:32:21.368536 [NOTICE] switch_loadable_module.c:270 Adding API Function 'skypiax_chat'
2009-11-03 17:32:21.368536 [NOTICE] switch_loadable_module.c:375 Adding Chat interface 'skype'

freeswitch@atom-2> sk list

API CALL [sk(list)] output:
sk console is NOT yet assigned
F ID        Name        IB (F/T)    OB (F/T)    State    CallFlw        UUID
= ====      ========      =======     =======    ======    ============    ======
  1    [interface1]      0/0         0/0    IDLE    CALL_IDLE    
  2    [interface2]      0/0         0/0    IDLE    CALL_IDLE    
  3    [interface3]      0/0         0/0    IDLE    CALL_IDLE    

Total Interfaces: 3  IB Calls(Failed/Total): 0/0  OB Calls(Failed/Total): 0/0

root@atom-2:~# sudo apt-get remove libbluetooth3

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Sljedeći paketi su automatski instalirani i više nisu potrebni:
  libxvmc1
Use 'apt-get autoremove' to remove them.
Slijedeći paketi će biti UKLONJENI:
  bluez bluez-alsa bluez-cups bluez-gstreamer evolution evolution-couchdb evolution-exchange evolution-indicator
  evolution-plugins gnome-pilot gnome-pilot-conduits gvfs-backends libbluetooth3 libgnome-pilot2 libpisock9
  libpisync1 obex-data-server obexd-client totem totem-mozilla totem-plugins
0 upgraded, 0 newly installed, 21 to remove and 0 not upgraded.
After this operation, 25,8MB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 130308 files and directories currently installed.)
Removing bluez ...
Removing bluez-alsa ...
Removing bluez-cups ...
Removing bluez-gstreamer ...
Removing evolution-plugins ...
Removing evolution-indicator ...

[config/dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.192" is not allowed to own the service "org.x.config.display103" due to security policies in the configuration file)

root@atom-2:/etc/dbus-1/system.d# vi xorg-server.conf
root@atom-2:/etc/dbus-1/system.d# service dbus restart

/etc/dbus-1/system.d/xorg-server.conf

<!DOCTYPE busconfig PUBLIC
 "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN" 
 "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
        <policy context="default">
                <allow own="org.x.config.display0"/>
                <allow send_destination="org.x.config.display0"/>
                <allow send_interface="org.x.config.display0"/>
                <allow own="org.x.config.display1"/>
                <allow send_destination="org.x.config.display1"/>
                <allow send_interface="org.x.config.display1"/>
                <allow own="org.x.config.display101"/>
                <allow send_destination="org.x.config.display101"/>
                <allow send_interface="org.x.config.display101"/>
                <allow own="org.x.config.display102"/>
                <allow send_destination="org.x.config.display102"/>
                <allow send_interface="org.x.config.display102"/>
                <allow own="org.x.config.display103"/>
                <allow send_destination="org.x.config.display103"/>
                <allow send_interface="org.x.config.display103"/>

        </policy>

</busconfig>

root@atom-2:/etc/dbus-1/system.d# usermod -a -G adm freeswitch

[dix] Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
(EE) config/hal: couldn't initialise context: unknown error (null)

ručno pokretanje skype klijenta jednom¶

jer traži prihvat korisničke licence

freeswitch@atom-2:~/.Skype$ skype --dbpath=/opt/freeswitch/.Skype/bringout_sa
freeswitch@atom-2:~/.Skype$ skype --dbpath=/opt/freeswitch/.Skype/bringout_sa_b
freeswitch@atom-2:~/.Skype$ skype --dbpath=/opt/freeswitch/.Skype/bringout_sa_c

test:

freeswitch@atom-2:~$ /bin/echo 'bringout_sa sarabonxxxx'| /usr/bin/skype --dbpath=/opt/freeswitch/.Skype/bringout_sa --pipelogin

root@atom-2:~# sudo apt-get remove gdm

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Sljedeći paketi su automatski instalirani i više nisu potrebni:
  libxvmc1
Use 'apt-get autoremove' to remove them.
Slijedeći paketi će biti UKLONJENI:
  gdm gdm-guest-session indicator-applet-session indicator-session
0 upgraded, 0 newly installed, 4 to remove and 1 not upgraded.
After this operation, 8352kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 129731 files and directories currently installed.)
Removing indicator-applet-session ...
Removing indicator-session ...
Removing gdm-guest-session ...
Removing gdm ...
stop: Unknown instance: 
Processing triggers for sreadahead ...
sreadahead will be reprofiled on next reboot
Processing triggers for desktop-file-utils ...
Processing triggers for hicolor-icon-theme ...

2009-11-04 11:43:59.959995 [ERR] mod_event_socket.c:2310 Socket Error! Could not listen on 127.0.0.1:8021
2009-11-04 11:44:00.060677 [ERR] mod_event_socket.c:2310 Socket Error! Could not listen on 127.0.0.1:8021
2009-11-04 11:44:00.161276 [ERR] mod_event_socket.c:2310 Socket Error! Could not listen on 127.0.0.1:8021
2009-11-04 11:44:00.261873 [ERR] mod_event_socket.c:2310 Socket Error! Could not listen on 127.0.0.1:8021
2009-11-04 11:44:00.375147 [ERR] mod_event_socket.c:2310 Socket Error! Could not listen on 127.0.0.1:8021
2009-11-04 11:44:00.485081 [ERR] mod_event_socket.c:2310 Socket Error! Could not listen on 127.0.0.1:8021

root@atom-2:~# cat /etc/group | grep pulse-access

pulse-access:x:118:freeswitch,root

nakon što sam stavio ovo --dbpath stvar ne radi ?!?!

2009-11-04 11:49:42.034943 [ERR] mod_skypiax.c:1364 rev [(nil)|37     ][ERRORA  1364 ][interface1][-1, 0, 0] The Skype client to which we are connected FAILED to gave us CURRENTUSERHANDLE=bringout_sa, interface_id=1 FAILED to start. No Skype client logged in as 'bringout_sa' has been found. Please (re)launch a Skype client logged in as 'bringout_sa'. Skypiax exiting now
2009-11-04 11:49:42.034943 [CRIT] switch_loadable_module.c:871 Error Loading module /opt/freeswitch/mod/mod_skypiax.so
**Module load routine returned an error**

nakon prelaska na dbpath sve skype klijente ustvari treba iznova podešavati¶

root@atom-2:~# /bin/echo 'bringout_sa sarabon_sa_01'| /usr/bin/skype --dbpath=/opt/freeswitch/.Skype/bringout_sa --pipelogin

bringout@desk-c2:~/devel/work/freeswitch/src/mod/endpoints/mod_skypiax/configs$ ./a.out

Skype instance found on display ':0.0', with id #56623169
RECEIVED==> ERROR 68
RECEIVED==> OK

juče danas - zaključci skypeiax¶

prvo sam se sahatima patio oko konfiguracije .. moja klasična nepažnja ...

ali sam na kraju došao do toga da multi install one user radi - samo je bitno da se instalacija nalazi na različitim ekranima (:103, :104 ..)

ovo radi:

#start the fake X server on a given port
/usr/bin/Xvfb :101 -ac &
sleep 3

# start a Skype client instance that will connect to the X server above, and will login to the Skype network using the 'username password' you send to it on stdin. Here xxxx would be the password and skypiax1 the username
su root -c "/bin/echo 'bringout_sa sarabon_sa_01'| DISPLAY=:101  /usr/bin/skype --dbpath=/opt/freeswitch/.Skype/bringout_sa --pipelogin &" 
sleep 7

#######################################################

/usr/bin/Xvfb :102 -ac &
sleep 3

su root -c "/bin/echo 'bringout_sa sarabon_sa_01'| DISPLAY=:102  /usr/bin/skype --dbpath=/opt/freeswitch/.Skype/bringout_sa_b --pipelogin &" 
sleep 7

u /opt/freeswitch/.Skype/bringout_sa /opt/freeswitch/.Skype/bringout_sa_b nalaze se podaci za istog klijenta bringout_sa i na taj način može se handlirati više poziva odjednom prema bringout_sa

freeswitch 100% cpu, neče da otkači skype klijenta¶

ovo mi se svako malo dešava nakon što interface 1 skype iax-a počne visiti (state: in converstaion a ustvari nije) i bez kill ... -s KILL nisam uspio oboriti

skype klijent 2.1.x beta, kvalitet zvuka, cpu zauzeće¶

alsa sound je kritičan

tek kada sam podesio pulseaudio dobio sam dobar zvuk

međutim ovaj klijent guta puno cpu-a 40-50% cpu

skype klijent 2.0.x¶

jedva nađoh ovaj klijent, i on mi pokazuje sa alsa dummy interfejsom (on i ne podržava pulseaudio) 3% zauzeće

ali freeswitch se i dalje zakucava

suma sumarum¶

freeswitch trunk 1.0.5 (trunk) mi izgleda nestabilan. mislim da sam sa 1.0.4 i sa skypiax 2.0.x postizao ranije dobre rezultate pa idem još to probati

naravno problem može biti i sa karmic-om ali mislim da to nije posrijedi

freeswitch 1.0.4¶

buildao 1.0.4 fs i cpu tokom skypiax poziva je 3-4% (fs) to je to.

međutim

kad sam pokušao:

freeswitch@internal> unload mod_skypiax

opet se fs smrzne i skroz zauzme procesor

root@atom-2:~/skype# top

top - 15:14:08 up  3:45,  3 users,  load average: 0.00, 0.11, 0.33
Tasks: 119 total,   1 running, 118 sleeping,   0 stopped,   0 zombie
Cpu(s):  3.6%us,  3.5%sy,  0.0%ni, 90.6%id,  0.0%wa,  2.3%hi,  0.0%si,  0.0%st
Mem:   1015264k total,  1003568k used,    11696k free,    41816k buffers
Swap:  2973688k total,    32240k used,  2941448k free,   675116k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND                                                                                                             
 6229 root      20   0  356m  28m 6480 S   13  2.9   0:36.62 freeswitch <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<                                                                                                           
 6198 root      20   0 91060  37m 4496 S    1  3.8   0:27.35 skype   <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< music on hold                                                                                                            
 6120 root      20   0 56120  11m 2736 S    1  1.1   0:01.90 Xvfb            

nakon što sam završio otkačio pozive radi:

freeswitch@atom-2> sk list

API CALL [sk(list)] output:
sk console is NOT yet assigned
     1    [interface1]    IDLE
     2    [interface2]    IDLE
     3    [interface3]    IDLE

Total: 3

pulseaudio linux 2.0 client off¶

oborio pulseaudio jer mi on samo može smetati u ovom scenariju

ovom mi se na konzoli pojavljuje

2009-11-04 15:17:58.444518 [WARNING] switch_core_file.c:120 Sample rate doesn't match
2009-11-04 15:17:59.786716 [WARNING] switch_core_file.c:120 Sample rate doesn't match
2009-11-04 15:18:00.306667 [WARNING] switch_core_file.c:120 Sample rate doesn't match
2009-11-04 15:18:00.826705 [WARNING] switch_core_file.c:120 Sample rate doesn't match
....

uspio sam međutim uhakati fs (cpu >100%) tako da je i skypiax ostao da visi busy:

freeswitch@atom-2> sk list

API CALL [sk(list)] output:
sk console is NOT yet assigned
     1    [interface1]    IDLE
     2    [interface2]    BUSY, session_uuid_str=|||c48212ce-c94c-11de-a39c-d348efbc290b|||
     3    [interface3]    IDLE

Total: 3

to sam postigao ovim dtmf-ovima u freeswitch meniju ?

međutim da li je razlog ovih problema ova demo ivr aplikacija ?

root@atom-2:~/skype# tail /opt/freeswitch/log/freeswitch.log --lines=100

2009-11-04 15:18:48.126641 [DEBUG] switch_ivr_menu.c:567 IVR menu 'demo_ivr' no input detected
2009-11-04 15:18:49.155655 [DEBUG] switch_ivr_play_say.c:118 No language specified - Using [en]
2009-11-04 15:18:49.155655 [DEBUG] switch_ivr_play_say.c:273 Handle play-file:[silence_stream://1000] (en:en)
2009-11-04 15:18:49.155655 [DEBUG] switch_ivr_play_say.c:1097 Codec Activated L16@16000hz 1 channels 20ms
2009-11-04 15:18:50.145479 [DEBUG] switch_ivr_play_say.c:1391 done playing file
2009-11-04 15:18:50.264585 [DEBUG] switch_ivr_play_say.c:273 Handle play-file:[ivr/ivr-to_call_the_freeswitch_conference.wav] (en:en)
2009-11-04 15:18:50.264585 [WARNING] switch_core_file.c:120 Sample rate doesn't match
2009-11-04 15:18:50.264585 [DEBUG] switch_ivr_play_say.c:1097 Codec Activated L16@16000hz 1 channels 20ms

komentarisao:

root@atom-2:~# vi /usr/share/alsa/alsa.conf

#pcm.hdmi cards.pcm.hdmi

conf/vars.xml

  <X-PRE-PROCESS cmd="set" data="default_provider=asterisk.bring.out.ba"/>
  <X-PRE-PROCESS cmd="set" data="default_provider_username=fs"/>
  <X-PRE-PROCESS cmd="set" data="default_provider_password=sa...."/>
  <X-PRE-PROCESS cmd="set" data="default_provider_from_domain=asterisk.bringout.ba"/>
  <!-- true or false -->
  <X-PRE-PROCESS cmd="set" data="default_provider_register=true"/>
  <X-PRE-PROCESS cmd="set" data="default_provider_contact=5060"/>

asterisk

[Nov  4 23:57:12] NOTICE[1907]: chan_sip.c:21006 handle_request_register: Registration from '<sip:fs@asterisk.bringout.ba;transport=udp>' failed for '192.168.45.23' - Not a local domain

??? vanjska ip adresa ?

atom-2*CLI>

    -- Registered SIP 'fs' at 89.146.173.226 port 5080
       > Saved useragent "FreeSWITCH-mod_sofia/1.0.5pre5-hacked" for peer fs

http://old.nabble.com/sip-trunking-question-td22541012.html
objašnjenje internal external

http://wiki.freeswitch.org/wiki/Connecting_Freeswitch_And_Asterisk

root@atom-2:/opt/freeswitch/conf/sip_profiles/internal# cat asterisk.bring.out.ba.xml

<include>
  <gateway name="$${default_provider}">
        <param name="username" value="$${default_provider_username}"/>
        <param name="password" value="$${default_provider_password}"/>
        <param name="from-user" value="$${default_provider_username}"/>
        <param name="from-domain" value="$${default_provider_from_domain}"/>
        <param name="expire-seconds" value="600"/>
        <param name="register" value="$${default_provider_register}"/>
        <param name="retry-seconds" value="30"/>
        <param name="extension" value="$${default_provider_contact}"/>
        <!--<param name="contact-params" value="domain_name=$${domain}"/>-->
        <param name="context" value="internal"/>
    </gateway>
</include>

reloadxml
reload mod_sofia

freeswitch@atom-2> sofia status

API CALL [sofia(status)] output:
                     Name          Type                               Data      State
=================================================================================================
                 internal       profile   sip:mod_sofia@192.168.45.23:5065      RUNNING (0)
    asterisk.bring.out.ba       gateway       sip:fs@asterisk.bring.out.ba      REGED
                 external       profile   sip:mod_sofia@192.168.45.23:5080      RUNNING (0)
            internal-ipv6       profile           sip:mod_sofia@[::1]:5065      RUNNING (0)
            192.168.45.23         alias                           internal      ALIASED
=================================================================================================

EVO BUG-a !!!!!!!!!!!!!!!!!!!¶

https://bugs.launchpad.net/ubuntu/+bug/442443

Every few seconds the disk writes (or reads - i have no idea).
iotop shows it to be kjournald2. kjournald2 only shows up in system monitor if it is launched with sudo.
Karmic beta i386 on intel atom mini-itx