|
################################################################################################
|
|
## Configuration template for GXV-3000 firmware version 1.1.3.14
|
|
################################################################################################
|
|
|
|
##############################################################################
|
|
## Advanced/System-wide Options
|
|
##############################################################################
|
|
|
|
# Password for configuration file authentication
|
|
P1 =
|
|
|
|
# Admin password for web interface, max. length is 30
|
|
P2 = sarabon
|
|
|
|
# G.723 rate: 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate
|
|
P49 =
|
|
|
|
P86 = 6
|
|
|
|
# Silence Suppression. 0 - no, 1 - yes
|
|
P50 = 0
|
|
|
|
# Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively)
|
|
P37 = 2
|
|
|
|
# Video frame rate: default - 15
|
|
P904 = 15
|
|
|
|
# Video bit rate (kbps): default is 128
|
|
P905 = 128
|
|
|
|
# Video Packet Size: maxlength = 4, from 100~1400, default is 1400
|
|
P927 = 800
|
|
|
|
# Video Rate Control. 0 - Frame, 1 - TMN8
|
|
P924 =
|
|
|
|
# Video Frame Skipping. 0 - no, 1 - yes
|
|
P925 = 0
|
|
|
|
# Sharpening Filter. (0-9, 0 means disabled, default is 5)
|
|
P938 = 5
|
|
|
|
# Brightening Filter. (0-9, 0 means disabled, default is 5)
|
|
P939 = 5
|
|
|
|
# Tone Remapping Filter. (0-255, 0 means disabled, default is 32)
|
|
P948 = 32
|
|
|
|
# Enable Video Surveillance. Turn phone into video surveillance camera if set to 1, YES. Default=No, 0.
|
|
P928 = 0
|
|
|
|
# Surveillance RTSP Port. Video Surveillance data stream port, default is 554.
|
|
P929 = 554
|
|
|
|
# Streaming RTSP Server
|
|
P953 =
|
|
|
|
# Streaming RTSP User ID
|
|
P954 =
|
|
|
|
# Streaming RTSP Password
|
|
P955 =
|
|
|
|
# Layer 3 QoS (IP Diff-Serv or Precedence value for RTP)
|
|
P38 = 0
|
|
|
|
# Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP)
|
|
P51 = 0
|
|
|
|
# Layer 2 QoS. 802.1p priority value (0 - 7)
|
|
P87 = 0
|
|
|
|
# No Key Entry Timeout. Default - 4 seconds.
|
|
P85 = 4
|
|
|
|
# Use # as Dial Key. 0 - no, 1 - yes
|
|
P72 = 1
|
|
|
|
# Local RTP port (1024-65535, default 5004)
|
|
P39 = 5004
|
|
|
|
# Use Random Port. 0 - no, 1 - yes
|
|
P78 = 0
|
|
|
|
# Keep-alive interval (in seconds. default 20 seconds)
|
|
P84 = 60
|
|
|
|
# Use NAT IP. This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50.
|
|
P101 =
|
|
|
|
# STUN server
|
|
P76 = stun.mycompany.com
|
|
|
|
#-------------------------------------------------------------
|
|
# Firmware Upgrade
|
|
#-------------------------------------------------------------
|
|
|
|
# Firmware Upgrade. 0 - TFTP Upgrade, 1 - HTTP Upgrade.
|
|
P212 = 0
|
|
|
|
# Firmware Server Path
|
|
# P192 = fm.grandstream.com/gs
|
|
P192 = 192.168.45.5
|
|
|
|
# Config Server Path
|
|
# P237 = fm.grandstream.com/gs
|
|
P237 = 192.168.45.5
|
|
|
|
# Firmware File Prefix
|
|
P232 =
|
|
|
|
# Firmware File Postfix
|
|
P233 =
|
|
|
|
# Config File Prefix
|
|
P234 =
|
|
|
|
# Config File Postfix
|
|
P235 =
|
|
|
|
# Allow DHCP Option 66 to override server. 0 - No, 1 - Yes. Default is Yes.
|
|
# When set to Yes(1), it will override the configured provision path and method.
|
|
P145 = 1
|
|
|
|
# Automatic Upgrade. 0 - No, 1 - Yes. Default is No.
|
|
P194 = 0
|
|
|
|
# Check for new firmware every () minutes, unit is in minute, minimnu 60 minutes, default is 7 days.
|
|
P193 = 10080
|
|
|
|
# Use firmware pre/postfix to determine if f/w is required
|
|
# 0 = Always Check for New Firmware
|
|
# 1 = Check New Firmware only when F/W pre/suffix changes
|
|
# 2 = Always Skip the Firmware Check
|
|
P238 = 0
|
|
|
|
# Authenticate Conf File
|
|
P240 = 0
|
|
|
|
# Enable Screen Saver Download
|
|
# 0 = No
|
|
# 1 = YES, HTTP
|
|
# 2 = YES, TFTP
|
|
P933 = 0
|
|
|
|
# Screen Saver Download Server Path
|
|
P934 =
|
|
|
|
# Enable Phonebook XML Download
|
|
# 0 = No
|
|
# 1 = YES, HTTP
|
|
# 2 = YES, TFTP
|
|
P330 = 0
|
|
|
|
# Phonebook XML Server Path
|
|
# This is a string of up to 128 characters that should contain a path to the XML file.
|
|
# It MUST be in the host/path format. For example: "directory.grandstream.com/engineering"
|
|
P331 =
|
|
|
|
# Remove Manually-edited entries on Download
|
|
# 0 - No, 1 - Yes
|
|
P333 = 0
|
|
|
|
# Enable Network Screen Saver
|
|
# 0 - No
|
|
# 1 - YES, HTTP
|
|
P943 = 0
|
|
|
|
# Network Screen Saver Server Path
|
|
P942 =
|
|
|
|
# Enable Weather Forecast
|
|
# 0 - No
|
|
# 1 - YES, HTTP
|
|
P945 = 0
|
|
|
|
# Weather Forecast Server Path
|
|
P944 =
|
|
|
|
# Enable Headline News
|
|
# 0 - No
|
|
# 1 - YES, HTTP
|
|
P947 = 0
|
|
|
|
# Headline News RSS Server Path
|
|
P946 =
|
|
|
|
# Offhook Auto Dial
|
|
P71 =
|
|
|
|
# DTMF Payload Type
|
|
P79 = 101
|
|
|
|
# Syslog Server (name of the server, max length is 64 charactors)
|
|
P207 =
|
|
|
|
# Syslog Level (Default setting is NONE)
|
|
# 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR
|
|
P208 = 0
|
|
|
|
# NTP Server
|
|
P30 = ntp.bring.out.ba
|
|
|
|
# Allow DHCP Option 42 to override NTP server. 0 - No, 1 - Yes. Default is No.
|
|
# When set to Yes(1), it will override the configured NTP server.
|
|
P144 = 0
|
|
|
|
# Distinctive Ring Tone
|
|
# Use custom ring tone 1 if incoming caller ID is the following:
|
|
P105 =
|
|
|
|
# Use custom ring tone 2 if incoming caller ID is the following:
|
|
P106 =
|
|
|
|
# Use custom ring tone 3 if incoming caller ID is the following:
|
|
P107 =
|
|
|
|
# System Ring Tone: input type = text, maxlength=64 size=30
|
|
P345 = f1=440,f2=480,c=200/400;
|
|
|
|
#------------------------------------------------------------
|
|
#Call Progress Tones: input type=text, maxlength=64, size=30
|
|
#------------------------------------------------------------
|
|
|
|
# Dial Tone
|
|
P343 = f1=350,f2=440;
|
|
|
|
# Message Waiting Tone
|
|
P344 = f1=350,f2=440,c=10/10;
|
|
|
|
# Ring Back Tone
|
|
P346 = f1=440,f2=480,c=200/400;
|
|
|
|
# Call-Waiting Tone
|
|
P347 = f1=440,f2=440,c=25/525;
|
|
|
|
# Busy Tone
|
|
P348 = f1=480,f2=620,c=50/50;
|
|
|
|
# Reorder Tone
|
|
P349 = f1=480,f2=620,c=25/25;
|
|
|
|
# Start Browser On Boot: 0 - no (default), 1 - yes
|
|
P950 = 0
|
|
|
|
# Enable Browser Toolbar: 0 - no (default), 1 - yes
|
|
P951 = 0
|
|
|
|
# Browser Home Page, maxlength=64, default = about:/start.htm
|
|
P952 = about:/start.htm
|
|
|
|
# Disable Call Waiting. 0 - no, 1 - yes
|
|
P91 = 0
|
|
|
|
# Disable Call Waiting Tone: 0 - no (default), 1 - yes
|
|
P186 = 0
|
|
|
|
# Disable Direct IP Call. 0 - no, 1 - yes
|
|
P277 = 0
|
|
|
|
# Use Quick IP-call mode: 0 - no, 1 - yes. Default is No.
|
|
P184 = 0
|
|
|
|
# Allow Media Loopback. 0 - no, 1 - yes
|
|
P278 = 0
|
|
|
|
# Lock Keypad Update. 0 - no, 1 - yes
|
|
P88 = 0
|
|
|
|
# Display Language. 0 - English, 1 - Downloaded Language, 2 - Chinese
|
|
P342 = 0
|
|
|
|
# language file postfix
|
|
P399 =
|
|
|
|
####################################################################
|
|
# Primary Account (Account 1) Settings
|
|
####################################################################
|
|
|
|
# Account Active (In Use). 0 - no, 1 - yes
|
|
P271 = 1
|
|
|
|
# Account Name
|
|
P270 = 20
|
|
|
|
# SIP Server: max. length = 96
|
|
P47 = asterisk.bring.out.ba
|
|
|
|
# Outbound Proxy
|
|
P48 = asterisk.bring.out.ba
|
|
|
|
# SIP User ID
|
|
P35 = 20
|
|
|
|
# Authenticate ID
|
|
P36 = 20
|
|
|
|
# Authenticate password
|
|
P34 = sarabon
|
|
|
|
# Display Name (John Doe)
|
|
P3 = hernad dish
|
|
|
|
# Use DNS SRV. 0 - No, 1 - Yes.
|
|
P103 = 0
|
|
|
|
# SIP User ID is phone number. 0 - no, 1 - yes
|
|
P63 = 0
|
|
|
|
# SIP Registration. 0 - no, 1 - yes
|
|
P31 = 1
|
|
|
|
# Unregister On Reboot. 0 - no, 1 - yes
|
|
P81 = 1
|
|
|
|
# Register Expiration (in minutes. default 1 hour, max 45 days)
|
|
P32 = 10
|
|
|
|
# SIP Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 20)
|
|
P138 = 20
|
|
|
|
# Local SIP port (default 5060)
|
|
P40 = 5060
|
|
|
|
# NAT Traversal (STUN). 0 - yes, 1 - no, 2 - No, but send keep-alive
|
|
P52 = 1
|
|
|
|
# SUBSCRIBE for MWI. (Whether or not send SUBSCRIBE for Message Waiting Indication) 0 - No, 1 - Yes.
|
|
P99 = 0
|
|
|
|
# Proxy-Require (A SIP extension to enable firewall penetration)
|
|
P197 =
|
|
|
|
# SIP Compact Header. 0 - no, 1 - yes
|
|
P289 = 0
|
|
|
|
# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
|
|
P33 =
|
|
|
|
# Send DTMF. 8 - in audio, 1 - via RTP, 2 - via SIP INFO, 11 - In Audio & RTP & SIP INFO
|
|
# 9 - In Audio & RTP, 10 - IN Audio & SIP INFO, 3 - RTP & SIP INFO
|
|
P73 = 8
|
|
|
|
# Early Dial (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes
|
|
P29 = 0
|
|
|
|
# Dial Plan Prefix (dial plan prefix string)
|
|
P66 =
|
|
|
|
# Dial Plan. Maxlength = 128 character. Defalut is allow all, {x.}, see user manual
|
|
P290 ={x+}
|
|
|
|
# Delayed Call Forward Wait Time. Default is 20 seconds, maxlength = 5
|
|
P139 = 20
|
|
|
|
# Enable Call Features. 0 - no, 1 - yes
|
|
P191 = 1
|
|
|
|
# Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535)
|
|
P260 = 180
|
|
|
|
# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)
|
|
P261 = 90
|
|
|
|
# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
|
|
P262 = 0
|
|
|
|
# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes
|
|
P263 = 0
|
|
|
|
# Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes
|
|
P264 = 0
|
|
|
|
# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
|
|
P266 = 0
|
|
|
|
# UAS Specify Refresher. 1 - UAC, 2 - UAS
|
|
P267 = 1
|
|
|
|
# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes
|
|
P265 = 0
|
|
|
|
# Enable 100rel. 0 - no, 1 - yes
|
|
P272 = 0
|
|
|
|
# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3.
|
|
P104 = 0
|
|
|
|
# Send Anonymous. 0 - no, 1 - yes (caller ID will be blocked if set to Yes)
|
|
P65 = 0
|
|
|
|
# Anonymous Call Rejection: 0 - no (default), 1 - yes
|
|
P129 = 0
|
|
|
|
# Refer-To Uses Target Contact: 0 - no (default), 1 - yes
|
|
P135 = 0
|
|
|
|
# Auto Answer. 0 - no, 1 - yes, 2 - Intercom/Paging
|
|
P90 = 0
|
|
|
|
# Preferred Vocoder
|
|
# 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA,
|
|
# 9 - G.722, 18 - G.729A/B, 98 - iLBC
|
|
|
|
# Currently only PCMU/PCMA, GSM, G.723, G.729 and G.726-32 supported, will add others in the future
|
|
|
|
# First codec.
|
|
P57 = 0
|
|
|
|
# Second codec.
|
|
P58 = 8
|
|
|
|
# Third codec.
|
|
P59 = 4
|
|
|
|
# Forth codec.
|
|
P60 = 18
|
|
|
|
# Fifth codec.
|
|
P61 = 3
|
|
|
|
# Sixth codec.
|
|
P62 = 2
|
|
|
|
# Seventh codec.
|
|
P46 = 0
|
|
|
|
# Eighth codec.
|
|
P98 = 0
|
|
|
|
# Preferred Video Coder: 99 - H.264, 34 - H.263, 103 - H.263+ (1998)
|
|
# Choice 1
|
|
P295 = 99
|
|
|
|
# Choice 2
|
|
P296 = 34
|
|
|
|
# Jitter Delay: 0 - Medium, 1 - Low, 2 - High
|
|
P300 = 0
|
|
|
|
# Enable Video: 0 - No, 1 - Yes
|
|
P292 = 1
|
|
|
|
# H.264 payload type: between 96 ~ 127, default = 99
|
|
P293 = 99
|
|
|
|
# H.263+ (1998) payload type: between 96 ~ 127, default = 103
|
|
P350 = 103
|
|
|
|
# SRTP Mode: Disabled - 0, Enabled but not forced - 1, Enabled and forced - 2
|
|
P183 = 0
|
|
|
|
# Special Feature. 100 - Standard, 101 - Nortel MCS, 102 - BroadSoft, 104 - Sonus, 108 - CBCOM, 109 - RNK
|
|
P198 = 100
|
|
|
|
########################################################################
|
|
# SIP Account 2 Settings
|
|
########################################################################
|
|
|
|
# Account Active (In Use). 0 - no, 1 - yes
|
|
P401 = 0
|
|
|
|
#Account Name
|
|
P417 =
|
|
|
|
# SIP Server
|
|
P402 =
|
|
|
|
# Outbound Proxy Server
|
|
P403 =
|
|
|
|
# Account 2 SIP User ID
|
|
P404 =
|
|
|
|
# Authenticate ID
|
|
P405 =
|
|
|
|
# Authenticate Password
|
|
P406 =
|
|
|
|
# Display Name (John Doe)
|
|
P407 =
|
|
|
|
# Use DNS SRV. 0 - No, 1 - Yes.
|
|
P408 = 0
|
|
|
|
# User ID is phone number; "user=phone". 0 - no, 1 - yes
|
|
P409 = 0
|
|
|
|
# SIP Registration. 0 - no, 1 - yes
|
|
P410 = 1
|
|
|
|
# Unregister on Reboot. 0 - no, 1 - yes
|
|
P411 = 0
|
|
|
|
# Register Expiration (in minutes. default 1 hour, max 45 days)
|
|
P412 = 60
|
|
|
|
# Registration Retry Wait Time (in seconds. Between 1-3600, default is 20)
|
|
P471 = 20
|
|
|
|
# Local SIP port (default 5062)
|
|
P413 = 5062
|
|
|
|
# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
|
|
P414 = 0
|
|
|
|
# Subscribe MWI. (Whether or not send SUBSCRIBE for Message Waiting Indication) 0 - No, 1 - Yes.
|
|
P415 = 0
|
|
|
|
# Proxy Require
|
|
P418 =
|
|
|
|
# SIP Compact Header. 0 - no, 1 - yes
|
|
P472 = 0
|
|
|
|
# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
|
|
P426 =
|
|
|
|
# Send DTMF. 8 - in audio, 1 - via RTP, 2 - via SIP INFO, 11 - In Audio & RTP & SIP INFO
|
|
# 9 - In Audio & RTP, 10 - IN Audio & SIP INFO, 3 - RTP & SIP INFO
|
|
P416 = 8
|
|
|
|
# Early Dial. 0 - no, 1 - yes
|
|
P422 = 0
|
|
|
|
# Dial Plan Prefix
|
|
P419 =
|
|
|
|
# Dial Plan. Maxlength = 128, default is allow all {x.}
|
|
P459 = {x.}
|
|
|
|
# Delayed Call Forward Wait Time. Default is 20 seconds, maxlength = 5
|
|
P470 = 20
|
|
|
|
# Enable Call Features. 0 - no, 1 - yes.
|
|
P420 = 1
|
|
|
|
# Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535)
|
|
P434 = 180
|
|
|
|
# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)
|
|
P427 = 90
|
|
|
|
# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
|
|
P428 = 0
|
|
|
|
# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes
|
|
P429 = 0
|
|
|
|
# Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes
|
|
P430 = 0
|
|
|
|
# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
|
|
P432 = 0
|
|
|
|
# UAS Specify Refresher. 1 - UAC, 2 - UAS
|
|
P433 = 1
|
|
|
|
# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes
|
|
P431 = 0
|
|
|
|
# Enable 100rel. 0 - no, 1 - yes
|
|
P435 = 0
|
|
|
|
# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3.
|
|
P423 = 0
|
|
|
|
# Send Anonymous. 0 - no, 1 - yes ((caller ID will be blocked if set to Yes)
|
|
P421 = 0
|
|
|
|
# Anonymous Call Rejection: 0 - no (default), 1 - yes
|
|
P446 = 0
|
|
|
|
# Refer-To Uses Target Contact: 0 - no (default), 1 - yes
|
|
P469 = 0
|
|
|
|
# Auto Answer. 0 - no, 1 - yes, 2 - Intercom/Paging
|
|
P425 = 0
|
|
|
|
# Preferred Vocoder
|
|
# 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA,
|
|
# 9 - G.722, 18 - G.729A/B, 98 - iLBC
|
|
|
|
# Currently only PCMU/PCMA, GSM, G.723, G.729 and G.726-32 supported, will add others in the future
|
|
|
|
# First codec.
|
|
P451 = 0
|
|
|
|
# Second codec.
|
|
P452 = 8
|
|
|
|
# Third codec.
|
|
P453 = 4
|
|
|
|
# Forth codec.
|
|
P454 = 18
|
|
|
|
# Fifth codec.
|
|
P455 = 3
|
|
|
|
# Sixth codec.
|
|
P456 = 2
|
|
|
|
# Seventh codec.
|
|
P457 = 0
|
|
|
|
# Eighth codec.
|
|
P458 = 0
|
|
|
|
# Preferred Video Codec: 99 - H.264, 34 - H.263 103 - H.263+ (1998)
|
|
# Choice 1
|
|
P464 = 99
|
|
|
|
# Choice 2
|
|
P465 = 34
|
|
|
|
# Jitter Delay: 0 - Medium, 1 - Low, 2 - High
|
|
P467 = 0
|
|
|
|
# Enable Video: 0 - No, 1 - Yes
|
|
P461 = 1
|
|
|
|
# H.264 payload type: between 96 ~ 127, default = 99
|
|
P462 = 99
|
|
|
|
# H.263+ (1998) payload type: between 96 ~ 127, default = 103
|
|
P473 = 103
|
|
|
|
# SRTP Mode: Disabled - 0, Enabled but not forced - 1, Enabled and forced - 2
|
|
P443 = 0
|
|
|
|
# Special Feature. 100 - Standard, 101 - Nortel MCS, 102 - BroadSoft, 104 - Sonus, 108 - CBCOM, 109 - RNK
|
|
P424 = 100
|
|
|
|
########################################################################
|
|
# SIP Account 3 Settings
|
|
########################################################################
|
|
|
|
# Account Active (In Use). 0 - no, 1 - yes
|
|
P501 = 0
|
|
|
|
# Account Name
|
|
P517 =
|
|
|
|
# SIP Server
|
|
P502 =
|
|
|
|
# Outbound Proxy Server
|
|
P503 =
|
|
|
|
# SIP User ID
|
|
P504 =
|
|
|
|
# Authenticate ID
|
|
P505 =
|
|
|
|
# Authenticate Password
|
|
P506 =
|
|
|
|
# Display Name (John Doe)
|
|
P507 =
|
|
|
|
# Use DNS SRV. 0 - No, 1 - Yes.
|
|
P508 = 0
|
|
|
|
# User ID is phone. "user=phone". 0 - no, 1 - yes
|
|
P509 = 0
|
|
|
|
# SIP Registration. 0 - no, 1 - yes
|
|
P510 = 1
|
|
|
|
# Unregister on Reboot. 0 - no, 1 - yes
|
|
P511= 0
|
|
|
|
# Register Expiration (in minutes. default 1 hour, max 45 days)
|
|
P512 = 60
|
|
|
|
# Registration Retry Wait Time (in seconds. Between 1-3600, default is 20)
|
|
P571 = 20
|
|
|
|
# SIP Local port (default 5064)
|
|
P513 = 5064
|
|
|
|
# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
|
|
P514 =
|
|
|
|
# Subscribe MWI. (Whether or not send SUBSCRIBE for Message Waiting Indication) 0 - no, 1 - yes
|
|
P515 = 0
|
|
|
|
# Proxy Require
|
|
P518 =
|
|
|
|
# SIP Compact Header. 0 - no, 1 - yes
|
|
P572 = 0
|
|
|
|
# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
|
|
P526 =
|
|
|
|
# Send DTMF. 8 - in audio, 1 - via RTP, 2 - via SIP INFO, 11 - In Audio & RTP & SIP INFO
|
|
# 9 - In Audio & RTP, 10 - IN Audio & SIP INFO, 3 - RTP & SIP INFO
|
|
P516 = 8
|
|
|
|
# Early Dial. 0 - no, 1 - yes
|
|
P522 = 0
|
|
|
|
# Dial Plan Prefix
|
|
P519 =
|
|
|
|
# Dial Plan: Maxlength = 128, default is allow all {x.}
|
|
P559 = {x.}
|
|
|
|
# Delayed Call Forward Wait Time. Default is 20 seconds, maxlength = 5
|
|
P570 = 20
|
|
|
|
# Enable Call Features. 0 - no, 1 - yes.
|
|
P520 = 1
|
|
|
|
# Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535)
|
|
P534 = 180
|
|
|
|
# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)
|
|
P527 = 90
|
|
|
|
# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
|
|
P528 =
|
|
|
|
# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes
|
|
P529 =
|
|
|
|
# Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes
|
|
P530 =
|
|
|
|
# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes
|
|
P531 =
|
|
|
|
# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
|
|
P532 = 0
|
|
|
|
# UAS Specify Refresher. 1 - UAC, 2 - UAS
|
|
P533 = 1
|
|
|
|
# Enable 100rel. 0 - no, 1 - yes
|
|
P535 = 0
|
|
|
|
# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3.
|
|
P523 = 0
|
|
|
|
# Send Anonymous (caller ID will be blocked if set to Yes). 0 - no, 1 - yes
|
|
P521 = 0
|
|
|
|
# Anonymous Call Rejection: 0 - no (default), 1 - yes
|
|
P546 = 0
|
|
|
|
# Refer-To Uses Target Contact: 0 - no (default), 1 - yes
|
|
P569 = 0
|
|
|
|
# Auto Answer. 0 - no, 1 - yes, 2 - Intercom/Paging
|
|
P525 = 0
|
|
|
|
# Preferred Vocoder
|
|
# 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA,
|
|
# 9 - G.722, 18 - G.729A/B, 98 - iLBC
|
|
|
|
# Currently only PCMU/PCMA, GSM, G.723, G.729 and G.726-32 supported, will add others in the future
|
|
|
|
# First codec.
|
|
P551 = 0
|
|
|
|
# Second codec.
|
|
P552 = 8
|
|
|
|
# Third codec.
|
|
P553 = 4
|
|
|
|
# Forth codec.
|
|
P554 = 18
|
|
|
|
# Fifth codec.
|
|
P555 = 3
|
|
|
|
# Sixth codec.
|
|
P556 = 2
|
|
|
|
# Seventh codec.
|
|
P557 = 0
|
|
|
|
# Eighth codec.
|
|
P558 = 0
|
|
|
|
# Preferred Video Codec: 99 - H.264, 34 - H.263, 103 - H.263+ (1998)
|
|
# Choice 1
|
|
P564 = 99
|
|
|
|
# Choice 2
|
|
P565 = 34
|
|
|
|
# Jitter Delay: 0 - Medium, 1 - Low, 2 - High
|
|
P567 = 0
|
|
|
|
# Enable Video: 0 - No, 1 - Yes
|
|
P561 = 1
|
|
|
|
# H.264 payload type: between 96 ~ 127, default = 99
|
|
P562 = 99
|
|
|
|
# H.263+ (1998) payload type: between 96 ~ 127, default = 103
|
|
P573 = 103
|
|
|
|
# SRTP Mode: Disabled - 0, Enabled but not forced - 1, Enabled and forced - 2
|
|
P543 = 0
|
|
|
|
# Special Feature. 100 - Standard, 101 - Nortel MCS, 102 - BroadSoft, 104 - Sonus, 108 - CBCOM, 109 - RNK
|
|
P524 = 100
|
|
|
|
#################################################################################
|
|
# End User Settings. Please do not edit this section.
|
|
#################################################################################
|
|
|
|
# Web Access. 0 - HTTP, 1 - HTTPS
|
|
# P900 = 0
|
|
|
|
# Web Port: HTTP default is 80 and HTTPS default is 443
|
|
# P901 = 80
|
|
|
|
# End User Password
|
|
# P196 = 123
|
|
|
|
# DHCP/PPPoE support. 0 - yes, 1 - no
|
|
# P8 = 0
|
|
|
|
# DHCP hostname, alphabet, max. length is 32
|
|
# P146 =
|
|
|
|
# DHCP domain, alphabet, max. length is 32
|
|
# P147 =
|
|
|
|
# DHCP vendor class ID, alphabet, max. length is 32
|
|
# P148 = Grandstream GXV-3000
|
|
|
|
# PPPoE support. PPPoE user ID
|
|
# P82 =
|
|
|
|
# PPPoE password
|
|
# P83 =
|
|
|
|
# PPPoE service name, max. length is 64 alpabit
|
|
# P269 =
|
|
|
|
# Preferred DNS server, four field, octet digits
|
|
# P92 =
|
|
# P93 =
|
|
# P94 =
|
|
# P95 =
|
|
|
|
# Static IP Address. Ignore if DHCP or PPPoE is used
|
|
#P9 = 192
|
|
#P10 = 168
|
|
#P11 = 0
|
|
#P12 = 1
|
|
|
|
# Subnet mask. Ignore if DHCP or PPPoE is used
|
|
#P13 = 255
|
|
#P14 = 255
|
|
#P15 = 255
|
|
#P16 = 0
|
|
|
|
# Default Router. Ignore if DHCP or PPPoE is used
|
|
#P17 = 192
|
|
#P18 = 168
|
|
#P19 = 1
|
|
#P20 = 1
|
|
|
|
# DNS 1. Ignore if DHCP or PPPoE is used
|
|
#P21 = 192
|
|
#P22 = 168
|
|
#P23 = 0
|
|
#P24 = 1
|
|
|
|
# DNS 2. Ignore if DHCP or PPPoE is used
|
|
#P25 = 0
|
|
#P26 = 0
|
|
#P27 = 0
|
|
#P28 = 0
|
|
|
|
#----------------------------------------------------------------------------------
|
|
# End User Time settings
|
|
#----------------------------------------------------------------------------------
|
|
|
|
# Time Zone. Offset in minutes to GMT.
|
|
# option value = 0 GMT-12:00 (International Date Line West)
|
|
# option value = 60 GMT-11:00 (Midway Island, Samoa)
|
|
# option value = 120 GMT-10:00 (US Hawaiian Time)
|
|
# option value = 180 GMT-9:00 (US Alaska Time)
|
|
# option value = 240 GMT-8:00 (US Pacific Time, Los Angeles)
|
|
# option value = 300 GMT-7:00 (US Mountain Time, Denver)
|
|
# option value = 360 GMT-6:00 (US Central Time, Chicago)
|
|
# option value = 420 GMT-5:00 (US Eastern Time, New York), --- Default ---
|
|
# option value = 450 GMT-4:30 (Venezuela)
|
|
# option value = 480 GMT-4:00 (Atlantic Time, Quebec)
|
|
# option value = 510 GMT-3:30 (Newfoundland)
|
|
# option value = 540 GMT-3:00 (Greenland)
|
|
# option value = 600 GMT-2:00 (Mid-Atlantic)
|
|
# option value = 660 GMT-1:00 (Azores, Cape Verdi Is.)
|
|
# option value = 720 GMT 0:00 (London, Dublin, Edinburgh, Lisbon, Casablanca, Monrovia)
|
|
# option value = 780 GMT+1:00 (Paris, Amsterdam, Berlin, Rome, Vienna, Madrid, Warsaw, Brussels)
|
|
# option value = 840 GMT+2:00 (Israel, Cairo, Athens, Helsinki, Istanbul, Bucuresti)
|
|
# option value = 900 GMT+3:00 (Moscow, Kuwait, Baghdad, Nairobi)
|
|
# option value = 930 GMT+3:30 (Tehran)
|
|
# option value = 960 GMT+4:00 (Abu Dhabi, Baku)
|
|
# option value = 990 GMT+4:30 (Kabul)
|
|
# option value = 1020 GMT+5:00 (Islamabad, Ekaterinburg, Karachi, Tashkent)
|
|
# option value = 1050 GMT+5:30 (Calcutta, Chennai, Mumbai, New Delhi)
|
|
# option value = 1065 GMT+5:45 (Kathmandu)
|
|
# option value = 1080 GMT+6:00 (Almaty, Astana, Dhaka, Novosibirsk)
|
|
# option value = 1110 GMT+6:30 (Rangoon)
|
|
# option value = 1140 GMT+7:00 (Bankok, Jakarta, Hanoi, Krasnoyarsk)
|
|
# option value = 1200 GMT+8:00 (Beijing, Singapore, Taipei, Kuala Lumpur, Irkutsk, Perth)
|
|
# option value = 1260 GMT+9:00 (Japan, Korea, Yakutsk)
|
|
# option value = 1290 GMT+9:30 (Adelaide, Darwin)
|
|
# option value = 1320 GMT+10:00 (Brisbane, Sydney, Melbourne, Canberra, Guam, Hobart)
|
|
# option value = 1380 GMT+11:00 (Magadan, Solomon Is., New Caledonia)
|
|
# option value = 1440 GMT+12:00 (Auckland, Wellington, Fiji)
|
|
# option value = 1500 GMT+13:00 (Nuku'alofa)
|
|
#---------------------------------------------------------------------------------------
|
|
P64 = 420
|
|
|
|
# Allow DHCP Option 2 to override Time Zone setting. 0 - No, 1 - Yes.
|
|
# When set to Yes(1), it will override the configured Time Zone setting if available.
|
|
P143 = 0
|
|
|
|
# Daylight Savings Time. 0 - no, 1 - yes
|
|
P75 = 0
|
|
|
|
# Optional Rule:
|
|
# If Daylight Saving Time is selected (P75 = 1), optional rule will allow automatically time ajustment based on the configured rule
|
|
# Maxlength = 33, default is North America or US Daylight Saving Time Schecule: value="3,2,7,2,0;11,1,7,2,0;60"
|
|
P246 = 3,2,7,2,0;11,1,7,2,0;60
|
|
|
|
# Time Display Format. 0 - 12 Hour, 1 - 24 Hour
|
|
P122 = 0
|
|
|
|
# Date Display Format. 0 - Year-Month-Day, 1 - Month-Day-Year, 2 - Day-Month-Year
|
|
P102 = 0
|
|
|
|
# Display Clock instead of Date. 0 - no, 1 - yes
|
|
P123 = 0
|
|
|
|
#----------------------------------------------------------------------------------
|
|
# End User LCD settings
|
|
#----------------------------------------------------------------------------------
|
|
|
|
# Disable SIP User Display: 0 - no (Default), 1 - yes
|
|
P940 = 0
|
|
|
|
# Disable IP Address Display: 0 - no (Default), 1 - yes
|
|
P941 = 0
|
|
|
|
# LCD Screen Saver Start Interval: in seconds, 0 means screen saver is off, max. length is 5
|
|
P913 = 60
|
|
|
|
# LCD Screen Saver Refresh Interval: in seconds. from 1-3600, default is 10, controls the time of screensaver image displayed on LCD.
|
|
P937 = 10
|
|
|
|
# LCD Auto Power Off Interval: in seconds, 0 means LCD will be always on, max. length is 5
|
|
P909 = 0
|
|
|
|
# LCD Brightness: max. length is 5, default is 128
|
|
P910 = 128
|
|
|
|
# LCD Contrast: max. length is 5, default is 128
|
|
P911 = 128
|
|
|
|
# LCD Chroma Saturation: max. length is 5, default is 128
|
|
P912 =128
|
|
|
|
# LCD Text Color: maxlength=3 size=5
|
|
# Red (0-255)
|
|
P930 = 255
|
|
# Green (0-255)
|
|
P931 = 255
|
|
# Blue (0-255)
|
|
P932 = 255
|
|
|
|
# LCD Background Color: value is 0 to 255
|
|
# Red
|
|
P906 = 0
|
|
# Green
|
|
P907 = 0
|
|
# Blue
|
|
P908 = 0
|
|
|
|
# OSD Text Color:
|
|
# value = 1 Blue
|
|
# value = 2 Black
|
|
# value = 3 Purple
|
|
# value = 4 Dark Blue
|
|
# value = 5 Green
|
|
# value = 6 Red
|
|
# value = 7 Olive
|
|
# value = 8 Light Grey
|
|
# value = 12 Yellow
|
|
# value = 15 White
|
|
P922 = 15
|
|
|
|
# PIP Position:
|
|
# value=0 Top Left
|
|
# value=1 Top Right
|
|
# value=2 Bottom Left
|
|
# value=3 Bottom Right
|
|
P936 = 0
|
|
|
|
# Camera Zoom Mode:
|
|
# value = 0 1.0:1 (wide and default)
|
|
# value = 1 1.1:1
|
|
# value = 2 1.2:1
|
|
# value = 3 1.3:1
|
|
# value = 4 1.4:1
|
|
# value = 5 1.5:1
|
|
# value = 6 1.6:1
|
|
# value = 7 1.7:1
|
|
# value = 8 1.8:1
|
|
# value = 9 1.9:1
|
|
# value = 10 2.0:1 <optical tele)
|
|
# value = 11 2.2:1
|
|
# value = 12 2.4:1
|
|
# value = 13 2.6:1
|
|
# value = 14 2.8:1
|
|
# value = 15 3.0:1
|
|
# value = 16 3.2:1
|
|
# value = 17 3.4:1
|
|
# value = 18 3.6:1
|
|
# value = 19 3.8:1
|
|
# value = 20 4.0:1 (digital tele)
|
|
P914 = 0
|
|
|
|
# Camera Exposure: Default: 0 = auto
|
|
# value = 0 Auto
|
|
# value = 5 Very Bright
|
|
# value = 2 Bright
|
|
# value = 6 Less Bright I
|
|
# value = 7 Less Bright II
|
|
# value = 8 Less Bright II
|
|
# value = 1 Normal
|
|
# value = 9 Less Dim I
|
|
# value = 10 Less Dim II
|
|
# value = 11 Less Dim III
|
|
# value = 3 Dim
|
|
# value = 12 Less Dark
|
|
# value = 4 Dark
|
|
# value = 13 Very Dark
|
|
P915 = 0
|
|
|
|
# Camera Color Mode: 0 = Color mode (Default), 1 = Monochrome
|
|
P919 = 0
|
|
|
|
# Camera White Balance: 0 = auto (Default), 1 = fixed
|
|
P920 = 0
|
|
|
|
# Camera Lens Correction: 0 = no, 1 = yes (Default)
|
|
P926 = 1
|
|
|
|
# TV Output: 0 = off (Default)
|
|
# value = 0 Off
|
|
# value = 1 NTSC
|
|
# value = 2 PAL-BDGHI
|
|
# value = 3 PAL-M/PALSA
|
|
# value = 4 PAL-Nc/PALSA
|
|
P916 = 0
|
|
|