system toolbox » voip

radi fax ali nije naštimano pdf-ovanje

root@rmlh-1:/var/spool/hylafax/recvq# ls -l

total 20
-rw------- 1 uucp uucp 11684 2008-06-04 09:41 fax000000004.tif
-rw------- 1 uucp uucp  1074 2008-06-04 09:47 fax000000005.tif
-rw------- 1 uucp uucp     1 2008-06-04 09:47 seqf

vjerovatno nije podešen FaxDispatch

slanje fax-ova

dozvoljeno bez passwd za sve na lan-u

root@rmlh-1:~/ruby# cat /etc/hylafax/hosts.hfaxd

# hosts.hfaxd
# This file contains permissions and password for every user in
# the system.
#
# For more information on this biject, please see its man page
# and the commands faxadduser and faxdeluser.
localhost:21::
192.168.45.*:

root@rmlh-1:~/ruby# invoke-rc.d hylafax restart

 * Stopping HylaFAX faxq                                                 [ OK ] 
 * Starting HylaFAX syncing directories...                                      + /bin/cp -p "/etc/hylafax/hosts.hfaxd" "/var/spool/hylafax/etc/hosts.hfaxd" 

međutim asterisk ga odbija sa sljedećom porukom

[Jun  4 10:42:01] NOTICE[29095]: chan_iax2.c:7842 socket_process: Rejected connect attempt from 127.0.0.1, request '032245686@rmlh' does not exist

joj mene sve je do iax.conf-a tu je stajao pogrešan context-rmlh (jer sam uzeo sašinu config)

evo ispravnog config-a

[iaxfax_1]
type=friend
host=dynamic
secret=sarabon
allow=all
jitterbuffer=no
qualify=no
notransfer=yes  
context=demo        <<<<<<<<<<<<<<<<<<<<<<
callerid="Fax Sigma-com" <+387-33-269-292>

  == Parsing '/etc/asterisk/sip_notify.conf': Found
    -- Accepting AUTHENTICATED call from 127.0.0.1:
       > requested format = slin,
       > requested prefs = (),
       > actual format = ulaw,
       > host prefs = (),
       > priority = mine
    -- Executing [036725891@demo:1] Macro("IAX2/iaxfax_1-999", "set_caller_id") in new stack
    -- Executing [s@macro-set_caller_id:1] NoOp("IAX2/iaxfax_1-999", "channel = IAX2/iaxfax_1-999") in new stack
    -- Executing [s@macro-set_caller_id:2] GotoIf("IAX2/iaxfax_1-999", "?3:5") in new stack
    -- Goto (macro-set_caller_id,s,5)
    -- Executing [s@macro-set_caller_id:5] Set("IAX2/iaxfax_1-999", "CALLERID(all)=officesa<269291>") in new stack
    -- Executing [s@macro-set_caller_id:6] NoOp("IAX2/iaxfax_1-999", "Finish if-set_caller_id-19") in new stack
    -- Executing [036725891@demo:2] Dial("IAX2/iaxfax_1-999", "ZAP/g1/036725891|400|tT") in new stack
    -- Requested transfer capability: 0x00 - SPEECH
    -- Called g1/036725891
    -- Zap/1-1 is proceeding passing it to IAX2/iaxfax_1-999
    -- Zap/1-1 is ringing
    -- Zap/1-1 answered IAX2/iaxfax_1-999
    -- Hungup 'Zap/1-1'
  == Spawn extension (demo, 036725891, 2) exited non-zero on 'IAX2/iaxfax_1-999'
    -- Hungup 'IAX2/iaxfax_1-999'

Your job to 036725891 was completed successfully.

            Pages: 1
         Receiver: 725891
          Quality: 98
       Page Width: 209 (mm)
      Page Length: 296
      Signal Rate: 14400 bit/s
      Data Format: 2-D MMR
 Remote Equipment: Panasonic
   Remote Station: FIDORIS        
          Dialogs: 1 (exchanges with remote device)
            Calls: 1 (total phone calls placed)
            Modem: any
   Submitted From: 192.168.45.183
            JobID: 11
          GroupID: 11
           CommID: c000000021

Processing time was 0:52.

primjetio sam da fax callerid nije naštiman pa sam extensions.ael nadogradio:

macro set_caller_id() {

            NoOp(channel = ${CHANNEL});
            if  ( "${CHANNEL}" =~ "(SIP/1)" )  {
              Set(CALLERID(all)=stan husremovic<269290>);
            }
            else if ( "${CHANNEL}" =~ "(IAX2/iaxfax_1)" )  {
              Set(CALLERID(all)=fax sc<269292>);
            }
            else {
              Set(CALLERID(all)=officesa<269291>);
            }

}

podesio

/etc/hylafax/FaxDispatch

FILETYPE=pdf;

case "$SENDER" in
*1*415*390*1212*) SENDTO=ernad.husremovic@sigma-com.net;; 
*)      SENDTO=office@sigma-com.net;;  # 
esac
case "$DEVICE" in
ttyIAX)            SENDTO=office@sigma-com.net;;
ttyLT0)           SENDTO=mary@home;;    # all faxes received on ttyLT0
esac
case "$CIDNUMBER" in
435*)        SENDTO=lee; FILETYPE=pdf;; # all faxes from area code 435
5059627777)  SENDTO=amy; FILETYPE=tif;; # Amy wants faxes in TIFF
esac
case "$SUBADDR" in
53)          SENDTO=FaxMaster;;         # without double-notification
roger)       SENDTO=roger;;             # possible text subaddressing
esac

server je puko , hernad rece otišo UPS

podesio i faxnotify da nam prikači izlazne faxove, vrlo korisno

root@rmlh-1:/var/spool/hylafax/etc# vi FaxNotify

RETURNFILETYPE=pdf;

root@rmlh-1:/var/spool/hylafax/etc# /etc/init.d/hylafax restart
 * Stopping HylaFAX faxq                                                                       [ OK ] 
 * Starting HylaFAX syncing directories...  

poslao test i stigao na mail

root@m1:~# sendfax -1 -n -f jasmina.alispahic@fuelboss.com.ba -R -d 033269292 test.ps
request id is 444 (group id 444) for host localhost (1 file)

provjerio pdf je OK

testirao i attachiranje pdf-a za izlazne faxove ..OK odradio resend drina goražde ponude

root@rmlh-1:/var/spool/hylafax/docq# sendfax -1 -n -f office@sigma-com.net -R -d 038221145 doc16.ps 
request id is 18 (group id 18) for host localhost (1 file)
root@rmlh-1:/var/spool/hylafax/docq# faxstat

..OK pdf stigao sa notifikacijom