Akcije
Podrška #14473
Zatvoren
zaptel neće da napravi izlaz odprve, iako su linije slobodne
Dodano od Ernad Husremović prije skoro 18 godina. Izmjenjeno prije više od 17 godina.
Početak:
06.06.2008
Završetak:
% završeno:
0%
Procjena vremena:
Opis
jutros nazovem ramaglas i svoju mamu i u oba slučaja mi samo pikne i odbije me ...
drugi treći put jednostavno prođe
Povezani tiketi 1 (0 otvoreno — 1 zatvoren)
Izmjenjeno od Ernad Husremović prije skoro 18 godina
Verbosity is at least 38
-- Executing [212643@demo:1] NoOp("SIP/20-0a92e220", ""lokal 6-cif"") in new stack
-- Executing [212643@demo:2] Macro("SIP/20-0a92e220", "set_caller_id") in new stack
-- Executing [s@macro-set_caller_id:1] NoOp("SIP/20-0a92e220", "channel = SIP/20-0a92e220") in new stack
-- Executing [s@macro-set_caller_id:2] GotoIf("SIP/20-0a92e220", "?3:5") in new stack
-- Goto (macro-set_caller_id,s,5)
-- Executing [s@macro-set_caller_id:5] GotoIf("SIP/20-0a92e220", "?6:8") in new stack
-- Goto (macro-set_caller_id,s,8)
-- Executing [s@macro-set_caller_id:8] Set("SIP/20-0a92e220", "CALLERID(all)=officesa<269291>") in new stack
-- Executing [s@macro-set_caller_id:9] NoOp("SIP/20-0a92e220", "Finish if-if-set_caller_id-9-10") in new stack
-- Executing [s@macro-set_caller_id:10] NoOp("SIP/20-0a92e220", "Finish if-set_caller_id-9") in new stack
-- Executing [212643@demo:3] Dial("SIP/20-0a92e220", "ZAP/g1/033212643|400|tT") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g1/033212643
-- Zap/1-1 is proceeding passing it to SIP/20-0a92e220
-- Channel 0/1, span 1 got hangup request, cause 17
-- Zap/1-1 is busy
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (1:1/0/0)
== Auto fallthrough, channel 'SIP/20-0a92e220' status is 'BUSY'
[Jun 6 09:25:38] WARNING[19053]: chan_zap.c:8713 pri_fixup_principle: Call specified, but not found? <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ????
-- Executing [212643@demo:1] NoOp("SIP/20-0a92fbf0", ""lokal 6-cif"") in new stack
-- Executing [212643@demo:2] Macro("SIP/20-0a92fbf0", "set_caller_id") in new stack
-- Executing [s@macro-set_caller_id:1] NoOp("SIP/20-0a92fbf0", "channel = SIP/20-0a92fbf0") in new stack
-- Executing [s@macro-set_caller_id:2] GotoIf("SIP/20-0a92fbf0", "?3:5") in new stack
-- Goto (macro-set_caller_id,s,5)
-- Executing [s@macro-set_caller_id:5] GotoIf("SIP/20-0a92fbf0", "?6:8") in new stack
-- Goto (macro-set_caller_id,s,8)
-- Executing [s@macro-set_caller_id:8] Set("SIP/20-0a92fbf0", "CALLERID(all)=officesa<269291>") in new stack
-- Executing [s@macro-set_caller_id:9] NoOp("SIP/20-0a92fbf0", "Finish if-if-set_caller_id-9-10") in new stack
-- Executing [s@macro-set_caller_id:10] NoOp("SIP/20-0a92fbf0", "Finish if-set_caller_id-9") in new stack
-- Executing [212643@demo:3] Dial("SIP/20-0a92fbf0", "ZAP/g1/033212643|400|tT") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g1/033212643
-- Zap/1-1 is proceeding passing it to SIP/20-0a92fbf0
-- Zap/1-1 is ringing
-- Zap/1-1 answered SIP/20-0a92fbf0
-- Hungup 'Zap/1-1'
== Spawn extension (demo, 212643, 3) exited non-zero on 'SIP/20-0a92fbf0'
Izmjenjeno od Ernad Husremović prije skoro 18 godina
- Naslov promijenjeno iz zaptel neće da izađe od prve nikako u zaptel neće da napravi izlaz odprve, iako su linije slobodne
Izmjenjeno od Ernad Husremović prije skoro 18 godina
slično sa slanjem sms-a ?!
[Jun 10 00:56:54] NOTICE[15230]: channel.c:2869 __ast_request_and_dial_callingpres_uniqueid: Unable to request channel zap/g1/139000
[Jun 10 00:56:54] NOTICE[15230]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy)
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 2)
[Jun 10 00:56:56] NOTICE[15263]: channel.c:2869 __ast_request_and_dial_callingpres_uniqueid: Unable to request channel zap/g1/139000
[Jun 10 00:56:56] NOTICE[15263]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy)
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 3)
[Jun 10 00:56:58] NOTICE[15306]: channel.c:2869 __ast_request_and_dial_callingpres_uniqueid: Unable to request channel zap/g1/139000
[Jun 10 00:56:58] NOTICE[15306]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy)
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 4)
[Jun 10 00:57:00] NOTICE[15338]: channel.c:2869 __ast_request_and_dial_callingpres_uniqueid: Unable to request channel zap/g1/139000
[Jun 10 00:57:00] NOTICE[15338]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy)
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 5)
[Jun 10 00:57:02] NOTICE[15345]: channel.c:2869 __ast_request_and_dial_callingpres_uniqueid: Unable to request channel zap/g1/139000
[Jun 10 00:57:02] NOTICE[15345]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy)
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 6)
[Jun 10 00:57:04] NOTICE[15346]: channel.c:2869 __ast_request_and_dial_callingpres_uniqueid: Unable to request channel zap/g1/139000
[Jun 10 00:57:04] NOTICE[15346]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy)
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 7)
[Jun 10 00:57:06] NOTICE[15347]: channel.c:2869 __ast_request_and_dial_callingpres_uniqueid: Unable to request channel zap/g1/139000
[Jun 10 00:57:06] NOTICE[15347]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy)
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 8)
[Jun 10 00:57:08] NOTICE[15348]: channel.c:2869 __ast_request_and_dial_callingpres_uniqueid: Unable to request channel zap/g1/139000
[Jun 10 00:57:08] NOTICE[15348]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy)
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 9)
[Jun 10 00:57:10] NOTICE[15349]: channel.c:2869 __ast_request_and_dial_callingpres_uniqueid: Unable to request channel zap/g1/139000
[Jun 10 00:57:10] NOTICE[15349]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy)
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 10)
[Jun 10 00:57:12] NOTICE[15350]: channel.c:2869 __ast_request_and_dial_callingpres_uniqueid: Unable to request channel zap/g1/139000
[Jun 10 00:57:12] NOTICE[15350]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy)
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 11)
[Jun 10 00:57:14] NOTICE[15351]: channel.c:2869 __ast_request_and_dial_callingpres_uniqueid: Unable to request channel zap/g1/139000
[Jun 10 00:57:14] NOTICE[15351]: pbx_spool.c:357 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy)
Izmjenjeno od Ernad Husremović prije skoro 18 godina
u određenom trenutku se desi da asterisk izgleda zauzme zaptel kanale, ... tada izlazni pozivi ne prolaze, ali ulazni znaju proći ??!
restartom asteriska sistem se vratio u normalno stanje.
evo jednog podužeg log-a, napravljen prilikom "ispipavanja" ovog problema
rmlh-1*CLI> zap show channel 1
Channel: 1>
File Descriptor: 11
Span: 1
Extension:
Dialing: no
Context: demo
Caller ID: 139000
Calling TON: 65
Caller ID name:
Destroy: 0>
InAlarm: 1
Signalling Type: ISDN PRI
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: noCLI>
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook
rmlh-1*CLI> zap show channel 2
Channel: 2>
File Descriptor: 12
Span: 1
Extension:
Dialing: no
Context: demo
Caller ID:
Calling TON: 0
Caller ID name:
Destroy: 0
InAlarm: 1
Signalling Type: ISDN PRI
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook
rmlh-1*CLI> zap show channel 3
Unable to find given channel 3
rmlh-1*CLI> zap show channel 4
Channel: 4>
File Descriptor: 13
Span: 2
Extension:
Dialing: no
Context: demo
Caller ID:
Calling TON: 0
Caller ID name:
Destroy: 0
InAlarm: 0
Signalling Type: ISDN PRI
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook
rmlh-1*CLI> zap show channel 5
Channel: 5>
File Descriptor: 14
Span: 2
Extension:
Dialing: no
Context: demo
Caller ID:
Calling TON: 0
Caller ID name:
Destroy: 0
InAlarm: 0
Signalling Type: ISDN PRI
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook
rmlh-1*CLI> zap show channel 1
Channel: 1>
File Descriptor: 11
Span: 1
Extension:
Dialing: no
Context: demo
Caller ID: 139000
Calling TON: 65
Caller ID name:
Destroy: 0
InAlarm: 1
Signalling Type: ISDN PRI
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook
rmlh-1*CLI> zap show channel 2
Channel: 2>
File Descriptor: 12
Span: 1
Extension:
Dialing: no
Context: demo
Caller ID:
Calling TON: 0
Caller ID name:
Destroy: 0
InAlarm: 1
Signalling Type: ISDN PRI
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook
rmlh-1*CLI> zap show channel 4
Channel: 4>
File Descriptor: 13
Span: 2
Extension:
Dialing: no
Context: demo
Caller ID:
Calling TON: 0
Caller ID name:
Destroy: 0
InAlarm: 0
Signalling Type: ISDN PRI
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook
rmlh-1*CLI> zap show channel 5
Channel: 5>
File Descriptor: 14
Span: 2
Extension:
Dialing: no
Context: demo
Caller ID:
Calling TON: 0
Caller ID name:
Destroy: 0
InAlarm: 0
Signalling Type: ISDN PRI
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook
-- Accepting voice call from '061141311' to '33269292' on channel 0/1, span 1
-- Executing [33269292@demo:1] Wait("Zap/1-1", "1") in new stack
-- Executing [33269292@demo:2] Answer("Zap/1-1", "") in new stack
-- Executing [33269292@demo:3] Dial("Zap/1-1", "IAX2/iaxfax_1/33269292") in new stack
-- Called iaxfax_1/33269292
-- Call accepted by 127.0.0.1 (format alaw)
-- Format for call is alaw
-- IAX2/iaxfax_1-5098 is ringing
-- IAX2/iaxfax_1-5098 answered Zap/1-1
-- Channel 0/1, span 1 got hangup request, cause 16
-- Hungup 'IAX2/iaxfax_1-5098'
== Spawn extension (demo, 33269292, 3) exited non-zero on 'Zap/1-1'
-- Hungup 'Zap/1-1'
-- Executing [061141311@demo:1] Macro("SIP/12-1bb73dc0", "set_caller_id") in new stack
-- Executing [s@macro-set_caller_id:1] NoOp("SIP/12-1bb73dc0", "channel = SIP/12-1bb73dc0") in new stack
-- Executing [s@macro-set_caller_id:2] GotoIf("SIP/12-1bb73dc0", "SIP/1?3:5") in new stack
-- Goto (macro-set_caller_id,s,3)
-- Executing [s@macro-set_caller_id:3] Set("SIP/12-1bb73dc0", "CALLERID(all)=stan husremovic<269290>") in new stack
-- Executing [s@macro-set_caller_id:4] Goto("SIP/12-1bb73dc0", "10") in new stack
-- Goto (macro-set_caller_id,s,10)
-- Executing [s@macro-set_caller_id:10] NoOp("SIP/12-1bb73dc0", "Finish if-set_caller_id-1") in new stack
-- Executing [061141311@demo:2] Dial("SIP/12-1bb73dc0", "ZAP/g1/061141311|400|tT") in new stack
[Jun 10 01:04:57] WARNING[19314]: app_dial.c:1202 dial_exec_full: Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion)
== Everyone is busy/congested at this time (1:0/1/0)
== Auto fallthrough, channel 'SIP/12-1bb73dc0' status is 'CONGESTION'
rmlh-1*CLI> help zap
zap destroy channel Destroy a channel
zap reset span Restart a zaptel span
zap restart Fully restart zaptel channels
zap show cadences List cadences
zap show channels Show active zapata channels
zap show channel Show information on a channel
zap show status Show all Zaptel cards status
rmlh-1*CLI> zap restart
Destroying channels and reloading zaptel configuration.
== Parsing '/etc/asterisk/zapata.conf': Found
[Jun 10 01:05:20] WARNING[18709]: chan_zap.c:976 zt_open: Unable to specify channel 1: Device or resource busy
[Jun 10 01:05:20] ERROR[18709]: chan_zap.c:7435 mkintf: Unable to open channel 1: Device or resource busy
here = 0, tmp->channel = 1, channel = 1
[Jun 10 01:05:20] ERROR[18709]: chan_zap.c:12211 build_channels: Unable to register channel '1-2'
[Jun 10 01:05:20] WARNING[18709]: chan_zap.c:11499 zap_restart: Reload channels from zap config failed!
rmlh-1*CLI> zap show channel
Usage: zap show channel <chan num>
Detailed information about a given channel
rmlh-1*CLI> zap show channels
Chan Extension Context Language MOH Interpret
rmlh-1*CLI> zap reset span
Usage: zap reset span <span>
Reset/Restart a zaptel span
rmlh-1*CLI> zap reset span 1
rmlh-1*CLI> zap reset span 2
rmlh-1*CLI> zap show channels
rmlh-1*CLI> zap restart
Chan Extension Context Language MOH Interpret
== Shutting down span 1. Please wait...
== Starting up span 1. Please wait...
== Reset of span 1 completed.
== Shutting down span 2. Please wait...
== Starting up span 2. Please wait...
== Reset of span 2 completed.
Destroying channels and reloading zaptel configuration.
== Parsing '/etc/asterisk/zapata.conf': Found
-- Registered channel 1, ISDN PRI signalling
-- Registered channel 2, ISDN PRI signalling
-- Registered channel 4, ISDN PRI signalling
-- Registered channel 5, ISDN PRI signalling
-- Automatically generated pseudo channel
== Parsing '/etc/asterisk/users.conf': Found
[Jun 10 01:08:02] ERROR[18709]: chan_zap.c:10729 start_pri: Unable to open D-channel 3 (Device or resource busy)
[Jun 10 01:08:02] ERROR[18709]: chan_zap.c:13055 setup_zap: Unable to start D-channel on span 1
[Jun 10 01:08:02] WARNING[18709]: chan_zap.c:11499 zap_restart: Reload channels from zap config failed!
rmlh-1*CLI> zap show channels
Chan Extension Context Language MOH Interpret
pseudo demo default
1 demo default
2 demo default
4 demo default
5 demo default
rmlh-1*CLI> zap show channels
Chan Extension Context Language MOH Interpret
pseudo demo default
1 demo default
2 demo default
4 demo default
5 demo default
rmlh-1*CLI> zap show channel 1
Channel: 1>
File Descriptor: 13
Span: 1
Extension:
Dialing: no
Context: demo
Caller ID:
Calling TON: 0
Caller ID name:
Destroy: 0
InAlarm: 0
Signalling Type: ISDN PRI
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook
rmlh-1*CLI>
rmlh-1*CLI> exit
Executing last minute cleanups
root@rmlh-1:~# cat /proc/zaptel/
1 2
root@rmlh-1:~# cat /proc/zaptel/1
Span 1: ztqoz/1/1 "duoBRI PCI ISDN Card 1 Span 1 [TE] (cardID 0) Layer 1 ACTIVATED (F7)" (MASTER) AMI/CCS
1 ztqoz1/1/1 Clear (In use)
2 ztqoz1/1/2 Clear (In use)
3 ztqoz1/1/3 HDLCFCS (In use)
root@rmlh-1:~# /etc/init.d/asterisk stop
Stopping Asterisk PBX: asterisk.
root@rmlh-1:~# cat /proc/zaptel/1
Span 1: ztqoz/1/1 "duoBRI PCI ISDN Card 1 Span 1 [TE] (cardID 0) Layer 1 DEACTIVATED (F3)" (MASTER) AMI/CCS
1 ztqoz1/1/1 Clear
2 ztqoz1/1/2 Clear
3 ztqoz1/1/3 HDLCFCS
root@rmlh-1:~# cat /proc/zaptel/2
Span 2: ztqoz/1/2 "duoBRI PCI ISDN Card 1 Span 2 [NT] (cardID 0) Layer 1 DEACTIVATED (G2)" AMI/CCS
4 ztqoz1/2/1 Clear
5 ztqoz1/2/2 Clear
6 ztqoz1/2/3 HDLCFCS
root@rmlh-1:~# /etc/init.d/asterisk start
Starting Asterisk PBX: asterisk.
root@rmlh-1:~# asterisk -rvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Asterisk , Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
== Parsing '/etc/asterisk/asterisk.conf': Found
== Parsing '/etc/asterisk/extconfig.conf': Found
Connected to Asterisk currently running on rmlh-1 (pid = 23416)
Verbosity was 0 and is now 38
== Primary D-Channel on span 1 up
== Primary D-Channel on span 1 up
rmlh-1*CLI> zap show channels
Chan Extension Context Language MOH Interpret
pseudo demo default
1 demo default
2 demo default
4 demo default
5 demo default
-- Saved useragent "IP Phone V1.54.004 CFG0 " for peer 51
-- Accepting voice call from '139000' to '33269291' on channel 0/1, span 1
-- Executing [33269291@demo:1] Wait("Zap/1-1", "1") in new stack
-- Executing [33269291@demo:2] Answer("Zap/1-1", "") in new stack
-- Executing [33269291@demo:3] NoOp("Zap/1-1", "Calleridnum 33269291 Zap/1-1 139000") in new stack
-- Executing [33269291@demo:4] GotoIf("Zap/1-1", "0?5:6") in new stack
-- Goto (demo,33269291,6)
-- Executing [33269291@demo:6] NoOp("Zap/1-1", "Finish if-demo-3") in new stack
-- Executing [33269291@demo:7] GotoIf("Zap/1-1", "6?8:10") in new stack
-- Goto (demo,33269291,8)
-- Executing [33269291@demo:8] NoOp("Zap/1-1", "goto smsphone: 139000 | 2") in new stack
-- Executing [33269291@demo:9] Goto("Zap/1-1", "smsphone|139000-2|1") in new stack
-- Goto (smsphone,139000-2,1)
-- Executing [139000-2@smsphone:1] NoOp("Zap/1-1", "Incoming SMS from 139000| user data | time date | sender | ms reference ") in new stack
-- Executing [139000-2@smsphone:2] SMS("Zap/1-1", "139000-2|at") in new stack
-- SMS TX 93 00 6D
-- SMS RX 91 17 00 09 81 60 11 14 13 F1 00 00 80 60 01 10 01 73 00 05 C1 F7 3C 1C 03 C8
-- SMS TX 95 02 00 00 69
-- SMS RX 94 00 6C
-- Executing [139000-2@smsphone:3] System("Zap/1-1", "smsq -rx --process="/usr/local/bin/asterisk_read_sms"") in new stack
-- Executing [139000-2@smsphone:4] Hangup("Zap/1-1", "") in new stack
== Spawn extension (smsphone, 139000-2, 4) exited non-zero on 'Zap/1-1'
-- Hungup 'Zap/1-1'
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 1)
-- Requested transfer capability: 0x00 - SPEECH
> Channel Zap/1-1 was answered.
> Launching SMS(0) on Zap/1-1
-- SMS RX 93 00 6D
-- SMS TX 91 28 05 00 09 81 60 11 14 13 F1 00 F1 20 53 6A 90 5A 9F 83 C2 EC B0 BC 0D 7A 9B CD E9 71...
-- SMS RX 95 09 01 00 80 60 01 10 01 94 00 DB
-- SMS TX 91 26 05 01 09 81 60 11 14 13 F1 00 F1 1D 53 6A 90 0A 0A B3 C3 F2 36 E8 6D 36 A7 C7 E5 79...
-- SMS RX 95 09 01 00 80 60 01 10 01 15 00 5A
-- SMS TX 91 31 05 02 09 81 60 11 14 13 F1 00 F1 2A D4 E2 94 0A 7A 9B CD E9 71 79 1E 66 81 C2 EC B0...
-- SMS RX 95 09 01 00 80 60 01 10 01 25 00 4A
-- SMS TX 91 28 05 03 09 81 60 11 14 13 F1 00 F1 20 53 6A 90 5A 9F 83 C2 EC B0 BC 0D 7A 9B CD E9 71...
-- SMS RX 95 09 01 00 80 60 01 10 01 35 00 3A
-- SMS TX 91 26 01 04 09 81 60 11 14 13 F1 00 F1 1D 53 6A 90 0A 0A B3 C3 F2 36 E8 6D 36 A7 C7 E5 79...
-- SMS RX 95 09 01 00 80 60 01 10 01 55 00 1A
-- SMS TX 94 00 6C
-- Channel 0/1, span 1 got hangup request, cause 16
-- Hungup 'Zap/1-1'
[Jun 10 01:11:17] NOTICE[24597]: pbx_spool.c:371 attempt_thread: Call completed to zap/g1/139000
-- Accepting voice call from '139000' to '33269291' on channel 0/1, span 1
-- Executing [33269291@demo:1] Wait("Zap/1-1", "1") in new stack
-- Executing [33269291@demo:2] Answer("Zap/1-1", "") in new stack
-- Executing [33269291@demo:3] NoOp("Zap/1-1", "Calleridnum 33269291 Zap/1-1 139000") in new stack
-- Executing [33269291@demo:4] GotoIf("Zap/1-1", "0?5:6") in new stack
-- Goto (demo,33269291,6)
-- Executing [33269291@demo:6] NoOp("Zap/1-1", "Finish if-demo-3") in new stack
-- Executing [33269291@demo:7] GotoIf("Zap/1-1", "6?8:10") in new stack
-- Goto (demo,33269291,8)
-- Executing [33269291@demo:8] NoOp("Zap/1-1", "goto smsphone: 139000 | 2") in new stack
-- Executing [33269291@demo:9] Goto("Zap/1-1", "smsphone|139000-2|1") in new stack
-- Goto (smsphone,139000-2,1)
-- Executing [139000-2@smsphone:1] NoOp("Zap/1-1", "Incoming SMS from 139000| user data | time date | sender | ms reference ") in new stack
-- Executing [139000-2@smsphone:2] SMS("Zap/1-1", "139000-2|at") in new stack
-- SMS TX 93 00 6D
-- SMS RX 91 17 00 09 81 60 11 14 13 F1 00 00 80 60 01 10 11 04 00 05 C1 F7 3C 1C 03 27
-- SMS TX 95 02 00 00 69
-- SMS RX 94 00 6C
-- Executing [139000-2@smsphone:3] System("Zap/1-1", "smsq -rx --process="/usr/local/bin/asterisk_read_sms"") in new stack
-- Executing [139000-2@smsphone:4] Hangup("Zap/1-1", "") in new stack
== Spawn extension (smsphone, 139000-2, 4) exited non-zero on 'Zap/1-1'
-- Hungup 'Zap/1-1'
-- Attempting call on zap/g1/139000 for application SMS(0) (Retry 1)
-- Requested transfer capability: 0x00 - SPEECH
> Channel Zap/1-1 was answered.
> Launching SMS(0) on Zap/1-1
-- Saved useragent "C455 IP020970000000" for peer 34
-- Saved useragent "C455 IP020970000000" for peer 31
-- SMS RX 93 00 6D
-- SMS TX 91 26 01 05 09 81 60 11 14 13 F1 00 F1 1D 53 6A 90 0A 0A B3 C3 F2 36 E8 6D 36 A7 C7 E5 79...
-- SMS RX 95 09 01 00 80 60 01 10 11 45 00 1A
-- SMS TX 94 00 6C
-- Channel 0/1, span 1 got hangup request, cause 16
-- Hungup 'Zap/1-1'
[Jun 10 01:12:16] NOTICE[24914]: pbx_spool.c:371 attempt_thread: Call completed to zap/g1/139000
Izmjenjeno od Ernad Husremović prije skoro 18 godina
šta je ovo ??!
tail /var/log/syslog (rmlh-1)
Jun 9 21:42:24 rmlh-1 kernel: capifs: Rev 1.1.2.3 Jun 9 21:42:24 rmlh-1 kernel: Registered Tormenta2 PCI Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: disagrees about version of symbol zt_receive Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: Unknown symbol zt_receive Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: disagrees about version of symbol zt_ec_chunk Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: Unknown symbol zt_ec_chunk Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: disagrees about version of symbol zt_transmit Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: Unknown symbol zt_transmit Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: disagrees about version of symbol zt_rbsbits Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: Unknown symbol zt_rbsbits Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: disagrees about version of symbol zt_unregister Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: Unknown symbol zt_unregister Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: disagrees about version of symbol zt_register Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: Unknown symbol zt_register Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: disagrees about version of symbol zt_alarm_notify Jun 9 21:42:25 rmlh-1 kernel: wcte12xp: Unknown symbol zt_alarm_notify Jun 9 21:42:25 rmlh-1 kernel: usbcore: registered new driver wcusb Jun 9 21:42:25 rmlh-1 kernel: Wildcard USB FXS Interface driver registered
Izmjenjeno od Ernad Husremović prije skoro 18 godina
neposredno prije toga:
Jun 9 21:42:24 rmlh-1 kernel: Zapata Telephony Interface Registered on major 196 Jun 9 21:42:24 rmlh-1 kernel: Zaptel Version: 1.4.10 Jun 9 21:42:24 rmlh-1 kernel: Zaptel Echo Canceller: MG2 Jun 9 21:42:24 rmlh-1 kernel: GSI 19 sharing vector 0x32 and IRQ 19 Jun 9 21:42:24 rmlh-1 kernel: ACPI: PCI Interrupt 0000:11:00.0[A] -> GSI 21 (level, low) -> IRQ 50 Jun 9 21:42:24 rmlh-1 kernel: qozap: Starting hardware watchdog. Jun 9 21:42:24 rmlh-1 kernel: qozap: Junghanns.NET duoBRI card configured at io port 0x2000 IRQ 50 HZ 1000 CardID 0 Jun 9 21:42:24 rmlh-1 kernel: qozap: S/T ports: 2 [ TE NT ] Jun 9 21:42:24 rmlh-1 kernel: qozap: 1 multiBRI card(s) in this box, 2 BRI ports total, bloop 0, pcmslave 0, dacs 1.
ovo je očigledno bio boot sistema, odakle oni unknown simboli na wcte12xp ??
Izmjenjeno od Ernad Husremović prije više od 17 godina
- Status promijenjeno iz Dodijeljeno u Zatvoreno
Akcije