system toolbox » ubuntu

predhodno stanje¶

prve dvije particije je uzela vista (boot + vista recovery particija, tako je to acer isporučio)

hernad@nmraka-1:~$ sudo sfdisk /dev/sda -l

Disk /dev/sda: 19457 cylinders, 255 heads, 63 sectors/track

Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/sda1   *      0+   1273    1274-  10233373+  27  Unknown
/dev/sda2       1274    4078    2805   22531162+   6  FAT16
/dev/sda3       4079    4200     122     979965   83  Linux
/dev/sda4       4201   19456   15256  122543820    5  Extended
/dev/sda5       4201+  19456   15256- 122543788+  8e  Linux LVM

hernad@nmraka-1:~$ sudo lvdisplay

  --- Logical volume ---
  LV Name                /dev/mraka3vg1/root_1
  VG Name                mraka3vg1
  LV UUID                RwjLHV-cRvi-WokV-LXJf-UUZ1-DCFb-4D2QY3
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                10,00 GB
  Current LE             2560
  Segments               1
  Allocation             inherit
  Read ahead sectors     0
  Block device           254:0

  --- Logical volume ---
  LV Name                /dev/mraka3vg1/root_2
  VG Name                mraka3vg1
  LV UUID                vKf13S-Uj3g-vccy-Uy1o-xwOU-uSXh-inNUmT
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                10,00 GB
  Current LE             2560
  Segments               1
  Allocation             inherit
  Read ahead sectors     0
  Block device           254:1

  --- Logical volume ---
  LV Name                /dev/mraka3vg1/data
  VG Name                mraka3vg1
  LV UUID                Yv1hBO-K0Ip-BV63-6RSB-2TKb-kqBZ-oFMLBi
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                60,00 GB
  Current LE             15360
  Segments               1
  Allocation             inherit
  Read ahead sectors     0
  Block device           254:2

  --- Logical volume ---
  LV Name                /dev/mraka3vg1/swap
  VG Name                mraka3vg1
  LV UUID                4lcw8y-bRai-HgzJ-ooc9-n3Lv-5vzZ-sjW8aH
  LV Write Access        read/write
  LV Status              available
  # open                 2
  LV Size                6,00 GB
  Current LE             1536
  Segments               1
  Allocation             inherit
  Read ahead sectors     0
  Block device           254:3

  --- Logical volume ---
  LV Name                /dev/mraka3vg1/root_3
  VG Name                mraka3vg1
  LV UUID                LGKfS0-ucON-PSC7-cxwt-KRAp-c93V-tu6WeY
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                10,00 GB
  Current LE             2560
  Segments               1
  Allocation             inherit
  Read ahead sectors     0
  Block device           254:4

  --- Logical volume ---
  LV Name                /dev/mraka3vg1/root_4
  VG Name                mraka3vg1
  LV UUID                mlzs0e-Jc88-CK3m-JEiK-Zxb1-6Kcl-j1lt43
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                6,00 GB
  Current LE             1536
  Segments               1
  Allocation             inherit
  Read ahead sectors     0
  Block device           254:5

na /dev/sda3 particiji sam imao sljedeći raspored:

/grub/menu.lst
     /boot_2
     /boot_3
     /boot_3

u root-u te boot particije sam imao podešen ubuntu gutsy (root sistem na root_1), a u poddirektorijima boot_2, boot_3, boot_4 sam podešavao kernele za druge ubuntu instalacije.

Zadnjih par mjeseci sam kroistio uglavnom boot_2 / root_2 instalaciju na kojoj je bio ubuntu hardy amd64

netboot install¶

na našem tftp serveru (router-back.bring.out.ba) nalazi se lokalni ubuntu repos

sa <F12> na acer-u sam otišao u boot meni i uradio netboot

pokušaj 1 neuspješno¶

prva greška koju sam napravio jeste to što nisam backupirao sadržaj /dev/sda3

• /dev/sda3 - /boot (odabrao u partition manageru da ne formatira sistem)
• /dev/mraka3vg1/root_1 - /
• /dev/mraka3vg1/data - /data

e tu mi je instaler rekao da će sadržaj direktorija u na /boot-u biti izgubljen ... ali ja nisam htio prekidati :( reko hadje da vidim

nakon instalacije, grub nije htio da se pokrene do kraja - rekao stao je na 1.5 ... očigledno da grub install nije kompletno se izvršio

pokušaj 2¶

u odnosu na pokušaj 1 rekao sam da mi /boot particiju formatira

nakon toga je grub upješno instaliran ali naravno ni traga o boot_2, boot_3 itd

dobro vratićemo to

uzeću sa smrake jedan amd64 kernel

tamo nema hardy kernela, pa sam uzeo gutsy, bitno mi je samo boot-ati sistem

root@nmraka-1:/boot/boot_2# scp root@smraka-1:/boot/*2.6.22-14* .

 
abi-2.6.22-14-generic                         100%  408KB 408.0KB/s   00:00    
config-2.6.22-14-generic                      100%   66KB  66.1KB/s   00:00    
initrd.img-2.6.22-14-generic                  100% 7547KB   7.4MB/s   00:01    
initrd.img-2.6.22-14-generic.bak              100% 7547KB   7.4MB/s   00:00    
System.map-2.6.22-14-generic                  100% 1028KB   1.0MB/s   00:00    
vmlinuz-2.6.22-14-generic                     100% 1703KB   1.7MB/s   00:00    
root@nmraka-1:/boot/boot_2# rm *.bak

vim-tiny => vim¶

root@nmraka-1:/boot/boot_2# apt-get install vim
root@nmraka-1:/boot/boot_2# apt-get remove vim-tiny

boot root_2 ubuntu amd64 instalacije¶

nakon što smo stavili kernel i initrd image u boot_2 trebamo podesiti grub

title           Ubuntu root_2 
root            (hd0,2)
kernel          /boot_2/vmlinuz-2.6.22-14-generic root=/dev/mapper/mraka3vg1-root_2 ro single
initrd          /boot_2/initrd.img-2.6.22-14-generic

/etc/apt/sources.list security.ubuntu.com => archive.sigma-com.net¶

prebacujemo security repos na lokalni mirror

otvorimo sources.list u vim-u pa zadamo komandu

:% s/security.ubuntu.com/archive.sigma-com.net/cg

update & upgrade

hernad@nmraka-1:~$ sudo apt-get update && sudo apt-get upgrade

root_2 amd64, ponovo¶

vratimo se na root_2 instalaciju, sa smrake sam prenio gutsy 2.6.22 kernel i sistem se boot-ao međutim vidim nemam drajvere za grafičku kartu, nemam networking ... pa da

u /lib/modules nemam ovog 2.6.22 kernela

ponoviću gornju operaciju uzeću sa mraka-2 2.6.24 kernel

hernad@nmraka-1:/boot/boot_2$ sudo scp hernad@192.168.45.167:/boot_1/boot_2/*2.6.24-16* .

abi-2.6.24-16-generic                         100%  410KB 410.3KB/s   00:00    
config-2.6.24-16-generic                      100%   72KB  72.3KB/s   00:00    
initrd.img-2.6.24-16-generic                  100% 8145KB   8.0MB/s   00:00    
initrd.img-2.6.24-16-generic.bak              100% 8072KB   7.9MB/s   00:01    
System.map-2.6.24-16-generic                  100% 1119KB   1.1MB/s   00:00    
vmlinuz-2.6.24-16-generic                     100% 1843KB   1.8MB/s   00:00    

da provjerim imam li ovaj za kernel /lib/modules ...

hernad@nmraka-1:/boot/boot_2$ ls /mnt/root_2/lib/modules/*2.6.24-16*

/mnt/root_2/lib/modules/2.6.24-16-generic:
build  misc

hah - nemam ja sam na root_2 sjećam se sve stare kernele deinstalirao radi uštede prostora - trebam 2.6.24-19-generic kernel

morao sam na mraka-2 instalirati 2.6.24-19 pa ga onda uzeo

root@nmraka-1:/boot/boot_2# scp hernad@192.168.45.167:/boot/*2.6.24-19* .

abi-2.6.24-19-generic                         100%  410KB 410.4KB/s   00:00    
config-2.6.24-19-generic                      100%   72KB  72.4KB/s   00:00    
initrd.img-2.6.24-19-generic                  100% 7871KB   7.7MB/s   00:01    
System.map-2.6.24-19-generic                  100% 1125KB   1.1MB/s   00:00    
vmlinuz-2.6.24-19-generic                     100% 1859KB   1.8MB/s   00:00 

i podesio u menu.lst da se ovaj kernel boot-a

grub saved / savedefault¶

podesiti da zapamti šta se zadnje boot-alo

/boot/grub/menu.lst

default         saved                      <<<<<<<<<<<<<<<<<<<

...

title           Ubuntu 8.04, kernel 2.6.24-19-generic
root            (hd0,2)
kernel          /vmlinuz-2.6.24-19-generic root=/dev/mapper/mraka3vg1-root_1 ro quiet splash
initrd          /initrd.img-2.6.24-19-generic
savedefault                               <<<<<<<<<<<<<<<<<<<<               

md5¶

The program 'md5' is currently not installed. You can install it by typing:
sudo apt-get install sleuthkit

firefox, java, adobe¶

home page: www.google.ba

hernad@nmraka-1:~$ sudo apt-get install sun-java6-jdk sun-java5-jdk

• Latest headlines (rss feeds)
• Getting Started

• adobe-ov flashplugin-nonfree 9.0.124

napomena: nakon što se plugin instalira potrebno je sve instance firefox-a zatvoriti, pa ponovo otvoriti stranicu, tada se flash sadržaj prikazuje uz pomoć novoinstaliranog player-a

/usr/local => /etc/usr_local¶

ovo sam počeo koristiti na serverima radi backup-a (backupiranje /etc/ lokacija) i mislim da je dobro i drugdje - na desktop-e postavljati:

root@zimbra-1:/etc# mkdir usr_local

root@zimbra-1:/etc# cd usr_local/

root@zimbra-1:/etc/usr_local# mv /usr/local/* .

root@zimbra-1:/etc/usr_local# cd ..
root@zimbra-1:/etc# rmdir /usr/local/

root@zimbra-1:/etc# ln -s /etc/usr_local /usr/local
root@zimbra-1:/etc# ls /usr/local -l -d
lrwxrwxrwx 1 root root 14 2008-07-12 10:19 /usr/local -> /etc/usr_local

microsoft fontovi¶

ref #14869 - default font na zimbra web klijentu, microsoft core true type fonts

gconf-editor - calendar app¶

• /desktop/gnome/applications/calendar
  • exec: firefox
  • exec_arg: http://zimbra.sigma-com.net

e sad ne znam gdje ovo da provjerim i koristim ?

/usr/local/bin/keyput.sh¶

podesio passwordless na smraka-1, ifold, monitor, ... jedino ne može na openwrt (router-wan-sa-1) pošto je on openwrt/dropbear ssh baziran

hernad@nmraka-1:/usr/local/bin$ ./ssh-keyput.sh root@smraka-1
Generating ssh1 RSA keys - please wait...
Generating public/private rsa1 key pair.
Your identification has been saved in /home/hernad/.ssh/identity.
Your public key has been saved in /home/hernad/.ssh/identity.pub.
The key fingerprint is:
5f:69:b0:5b:f4:21:d9:85:17:1e:ab:12:83:e6:f4:bc hernad@nmraka-1
Generating ssh2 DSA keys - please wait...
Generating public/private dsa key pair.
Your identification has been saved in /home/hernad/.ssh/id_dsa.
Your public key has been saved in /home/hernad/.ssh/id_dsa.pub.
The key fingerprint is:
e9:f1:e5:e1:f0:2c:a2:89:e7:0f:6e:67:af:52:73:50 hernad@nmraka-1
You will now be asked for password for root@smraka-1
root@smraka-1's password: 
Keys were put successfully
Checking root@smraka-1 connectivity by ssh1... failed
Checking root@smraka-1 connectivity by ssh2... OK
hernad@nmraka-1:/usr/local/bin$ ./ssh-keyput.sh root@ifold
ssh1 RSA key is present
ssh2 DSA key is present
You will now be asked for password for root@ifold
Warning: Permanently added 'ifold,192.168.45.4' (RSA) to the list of known hosts.
root@ifold's password: 
Keys were put successfully
Checking root@ifold connectivity by ssh1... failed
Checking root@ifold connectivity by ssh2... OK
hernad@nmraka-1:/usr/local/bin$ ./ssh-keyput.sh root@monitor
ssh1 RSA key is present
ssh2 DSA key is present
You will now be asked for password for root@monitor
Warning: Permanently added 'monitor,192.168.45.59' (RSA) to the list of known hosts.
root@monitor's password: 
Keys were put successfully
Checking root@monitor connectivity by ssh1... failed
Checking root@monitor connectivity by ssh2... OK
hernad@nmraka-1:/usr/local/bin$ ./ssh-keyput.sh root@dualco-705.bring.out.ba
ssh1 RSA key is present
ssh2 DSA key is present
You will now be asked for password for root@dualco-705.bring.out.ba
root@dualco-705.bring.out.ba's password: 
Keys were put successfully
Checking root@dualco-705.bring.out.ba connectivity by ssh1... failed
Checking root@dualco-705.bring.out.ba connectivity by ssh2... OK
hernad@nmraka-1:/usr/local/bin$ ./ssh-keyput.sh root@router-wan-sa-1
ssh1 RSA key is present
ssh2 DSA key is present
You will now be asked for password for root@router-wan-sa-1
Warning: Permanently added 'router-wan-sa-1,192.168.45.254' (RSA) to the list of known hosts.
root@router-wan-sa-1's password: 
Connection to router-wan-sa-1 closed by remote host.
Error putting keys to root@router-wan-sa-1
Checking root@router-wan-sa-1 connectivity by ssh1... failed

router-wan-sa-1 passwordless, hernad@bring.out.ba.pub¶

hernad@nmraka-1:~/.ssh$ ssh-keygen -t rsa

Generating public/private rsa key pair.
Enter file in which to save the key (/home/hernad/.ssh/id_rsa): hernad@bring.out.ba
Enter passphrase (empty for no passphrase): 
Enter same passphrase again: 
Your identification has been saved in hernad@bring.out.ba.
Your public key has been saved in hernad@bring.out.ba.pub.
The key fingerprint is:
96:0c:cd:eb:f3:27:01:38:c9:c9:49:b6:4b:ff:57:f6 hernad@nmraka-1
hernad@nmraka-1:~/.ssh$ vi hernad@bring.out.ba.pub
hernad@nmraka-1:~/.ssh$ vi config
hernad@nmraka-1:~/.ssh$ cat config
IdentityFile ~/.ssh/hernad@bring.out.ba

root@router-wan-sa-1:/etc/dropbear# vi authorized_keys

=> zamjenio staru stavku sa sadržajem hernad@bring.out.ba.pub

radi:

hernad@nmraka-1:~/.ssh$ ssh root@router-wan-sa-1

BusyBox v1.8.2 (2008-04-19 15:40:45 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 KAMIKAZE (bleeding edge, unknown) -------------------
  * 10 oz Vodka       Shake well with ice and strain
  * 10 oz Triple sec  mixture into 10 shot glasses.
  * 10 oz lime juice  Salute!
 ---------------------------------------------------

evolution remove¶

hernad@nmraka-1:/usr/local/bin$ sudo apt-get remove evolution-common

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Slijedeći paketi će biti UKLONJENI:
  evolution evolution-common evolution-exchange evolution-plugins
0 upgraded, 0 newly installed, 4 to remove and 0 not upgraded.
After this operation, 106MB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 118566 files and directories currently installed.)
Removing evolution-plugins ...
Removing evolution-exchange ...
Removing evolution ...
Removing evolution-common ...

kada se instalira printer, onda kod sebe prilikom printa možemo odabrati advanced settings kao što je odabir boje i sl, bez predhodnog koraka to ne radi

/home => /data/home_1¶

sudo su -

root@nmraka-1:/data# cd /data/home
root@nmraka-1:/data# mkdir home_1
root@nmraka-1:/data# cp -av /home/* /data/home_1/

root@nmraka-1:~# mv /home/ /home.orig

root@nmraka-1:~# ln -s /home /data/
harbour/    home/       home_1/     lost+found/ tmp/        
root@nmraka-1:~# ln -s /data/home_1 /home
root@nmraka-1:~# ls /home
hernad
root@nmraka-1:~# ls -l -d /home
lrwxrwxrwx 1 root root 12 2008-07-12 12:19 /home -> /data/home_1
root@nmraka-1:~# rm -r -f /home.orig
rm: ne mogu ukloniti `/home.orig/hernad/.gvfs': Permission denied

reboot

certifikati kimtec, elba¶

#14873 #14874

svi ovi certifikati su non-trusted pa treba ručno dodati exception u firefox-3

~/admin => /data/admin¶

hernad@nmraka-1:/data/home/hernad$ ls /data/admin

backup.bring.out.ba   etc_router-sa.tar.gz.gpg  openvpn    router-wan-sa-1
etc_router-sa.tar     masine                    pound
etc_router-sa.tar.gz  openhosting               router-sa

hernad@nmraka-1:/data/home/hernad$ sudo ln -s /data/admin /home/hernad/admin

openvpn¶

#14881

traceroute¶

korisna komanda često zatreba:

$sudo apt-get install traceroute

wireless¶

ne kontam kako, ali wireless sada radi #14882 ??

[   33.576945] MadWifi: ath_attach: Switching rfkill capability off
[   33.629194] ath_rate_sample: 1.2 (trunk)
[   33.629371] MadWifi: ath_attach: Switching per-packet transmit power control off
[   33.629752] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[   33.629758] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[   33.629766] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[   33.629774] wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
[   33.629776] wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
[   33.629778] wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
[   33.629781] wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
[   33.629783] wifi0: ath_announce: Use hw queue 8 for CAB traffic
[   33.629786] wifi0: ath_announce: Use hw queue 9 for beacons

hernad@nmraka-1:~/devel/git/redmine-1.bring.out.ba/alarm$ lsmod | grep ath

ath_rate_sample        16128  1 
ath_pci               193324  0 
wlan                  252272  5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal               280416  3 ath_rate_sample,ath_pci

zekr 0.7.0 beta1¶

Quranic Study Tool

Zekr is an open platform Quran study tool for simply browsing and researching on the Holy Quran (Koran).

• Revelation pack support (revelation order of suras or ayas);
• A builtin Quran recitation player;
• Advanced search using Lucene powerful text search library: Boolean operators, groups, wild cards, scopes, ...;
• "Uthman Taha (experimental)" theme: This theme uses me_quran font (designed by Meor Ridzuan) for rendering Quran ayas;
• Zekr supports managed/scoped searching of the whole Quran and translations, with matching and non-matching diacritics plus translation and theme support;
• Zekr is flexible in adding new plugins, themes, language packs, and Quran's translations and recitations.
  Quran Translations in different languages are available for Zekr: http://www.zekr.org/resources.html
  Please be aware although the Quran text used in Zekr is one of the most accurate electronic Quran texts, it might still have some typos (If you find any we will be grateful if you report them).
  Homepage: http://www.zekr.org/

virtualbox 1.6.2¶

Sun xVM VirtualBox

VirtualBox is a powerful PC virtualization solution allowing you to run a wide range of PC operating systems on your Linux system. This includes Windows, Linux, FreeBSD, DOS, OpenBSD and others. VirtualBox comes with a broad feature set and excellent performance, making it the premier virtualization software solution on the market.

vim¶

prema #14527

hernad@nmraka-1:~$ cat ~/.vimrc

set nocompatible
set ignorecase
source /usr/share/vim/vim71/mswin.vim
behave mswin

syntax on
colo evening

set ai
set vb
set backspace=indent,eol,start

vlc - video lan client¶

#apt-get install vlc

- dodatni codec-i za totem (čitanje streamova sa darwing streaming server-a)¶

#14995

vbox VDI /data/vbox¶

hernad@nmraka-1:/data$ sudo mkdir vbox

 
hernad@nmraka-1:/data$ cd vbox
hernad@nmraka-1:/data/vbox$ cd ..
hernad@nmraka-1:/data$ sudo chown hernad.users vbox
hernad@nmraka-1:/data$ cd vbox

hernad@nmraka-1:/data/vbox$ mv /data/home/hernad/.VirtualBox/VDI/*vdi .

hernad@nmraka-1:/data/vbox$ sudo ln -s /data/vbox /home/hernad/.VirtualBox/VDI

user in vboxusers¶

hernad@nmraka-1:~$ sudo usermod -a -G vboxusers hernad

games: foobillard¶

hernad@nmraka-1:~$ sudo apt-get install foobillard

kvm¶

hernad@nmraka-1:~$ sudo apt-get install kvm

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Sljedeći paketi su automatski instalirani i više nisu potrebni:
  libqt4-core libqt4-gui
Use 'apt-get autoremove' to remove them.
Slijedeći dodatni paketi će biti instalirani:
  bridge-utils vgabios
Predloženi paketi:
  debootstrap etherboot kvm-source
Preporučeni paketi:
  qemu vde2
Slijedeći NOVI paketi će biti instalirani:
  bridge-utils kvm vgabios
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 816kB of archives.
After this operation, 2744kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://archive.sigma-com.net hardy/main bridge-utils 1.2-2 [29,6kB]
Get:2 http://archive.sigma-com.net hardy/main vgabios 0.6a-3ubuntu1 [77,9kB]
Get:3 http://archive.sigma-com.net hardy-updates/main kvm 1:62+dfsg-0ubuntu8 [708kB]
Fetched 816kB in 4s (168kB/s)
Selecting previously deselected package bridge-utils.
(Reading database ... 121278 files and directories currently installed.)
Unpacking bridge-utils (from .../bridge-utils_1.2-2_i386.deb) ...
Selecting previously deselected package vgabios.
Unpacking vgabios (from .../vgabios_0.6a-3ubuntu1_all.deb) ...
Selecting previously deselected package kvm.
Unpacking kvm (from .../kvm_1%3a62+dfsg-0ubuntu8_i386.deb) ...
Adding group `kvm' (GID 125) ...
Gotovo.
Setting up bridge-utils (1.2-2) ...

Setting up vgabios (0.6a-3ubuntu1) ...
Setting up kvm (1:62+dfsg-0ubuntu8) ...
 * Loading kvm module kvm_amd

hernad@nmraka-1:~$ sudo usermod -a -G kvm hernad

a sve ovo podešavam da probam kvm image od ubuntu mobile edition #15052

java development - ant¶

hernad@nmraka-1:~/devel/git/redmine-1.bring.out.ba/netbeans$ sudo apt-get install ant

Setting up ant (1.7.0-3) ...

$ sudo apt-get install ant-optional

sada idem pokušati netbeans 6.5m1 build #15056

build ubuntu package - fakeroot¶

hernad@nmraka-1:~/devel/git/ubuntu-hardy-openvz$ sudo apt-get install fakeroot

hardy-openvz build dependencies:

hernad@nmraka-1:~/devel/git/ubuntu-hardy-openvz$ sudo apt-get install debhelper gawk xmlto docbook-utils transfig sharutils kernel-wedge

visual diff - meld¶

hernad@nmraka-1:~/devel/git/redmine-1.bring.out.ba/netbeans/ide/launcher/unix$ sudo apt-get install meld

java applet java6-plugin¶

hernad@nmraka-1:~$ sudo apt-get install sun-java6-plugin

linux-image openvz¶

hernad@nmraka-1:~/devel/git/ubuntu-hardy-openvz$ sudo apt-get install linux-image-2.6.24-19-openvz linux-headers-2.6.24-19-openvz

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Predloženi paketi:
  linux-doc-2.6.24 linux-source-2.6.24
Slijedeći NOVI paketi će biti instalirani:
  linux-headers-2.6.24-19-openvz linux-image-2.6.24-19-openvz
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 21,4MB of archives.
After this operation, 81,2MB of additional disk space will be used.
Get:1 http://archive.sigma-com.net hardy-updates/universe linux-image-2.6.24-19-openvz 2.6.24-19.36 [20,2MB]

$ sudo apt-get install linux-ubuntu-modules-2.6.24-19-openvz

ručno podesio menu.lst, dodao openvz kernel na vrh liste

hernad@nmraka-1:~$ sudo vi /boot/grub/menu.lst

hernad@nmraka-1:~$ sudo apt-get install linux-restricted-modules-2.6.24-19-openvz

.bashrc ~/bin¶

export PATH=/home/hernad/bin:$PATH

mysql - netbeans rails depot application¶

hernad@nmraka-1:~$ sudo apt-get install mysql-server mysql-client-5.0

hernad@nmraka-1:~$ mysqladmin -u root -p create depot_development
Enter password:

<empty>

openvz - vzctl¶

hernad@nmraka-1:~$ sudo apt-get install vzctl

Setting up vzquota (3.0.11-1) ...
Setting up vzctl (3.0.22-5ubuntu1) ...

openvz vboxdr rebuild¶

hernad@nmraka-1:~/devel/git/fmk$ sudo invoke-rc.d vboxdrv setup

 * Stopping VirtualBox kernel module                                             *  done.
 * Recompiling VirtualBox kernel module                                          *  done.
 * Starting VirtualBox kernel module                                             *  done.

harbour env variables¶

~/.bashrc

HB_PREF=hb
HB_ARCHITECTURE=linux
HB_BIN_INSTALL=/usr/harbour/bin
HB_COMPILER=gcc
HB_GT_LIB=gttrm

HB_INC_COMPILE=/usr/harbour/include
HB_LIB_COMPILE=/usr/harbour/lib

HB_INC_INSTALL=/usr/harbour/include
HB_BIN_INSTALL=/usr/harbour/bin
HB_LIB_INSTALL=/usr/harbour/lib

export HB_ARCHITECTURE HB_GT_LIB HB_COMPILER
export HB_BIN_INSTALL
export HB_LIB_COMPILE HB_LIB_INSTALL
export HB_INC_COMPILE HB_INC_INSTALL
export HB_PREF

PATH=/usr/harbour/bin:$PATH

export PATH

harbour dependency libraries:

hernad@nmraka-1:~$ sudo apt-get install libncurses-dev libslang2-dev libx11-dev libgpmg1-dev unixodbc-dev

/usr/harbour

hernad@nmraka-1:~/devel/git/fmk/harbour/harbour$ sudo mkdir /usr/harbour
hernad@nmraka-1:~/devel/git/fmk/harbour/harbour$ sudo chown hernad.users /usr/harbour
hernad@nmraka-1:~$ mkdir /usr/harbour/bin
hernad@nmraka-1:~$ mkdir /usr/harbour/lib
hernad@nmraka-1:~$ mkdir /usr/harbour/include

harbour make¶

na osnovu #14569

hernad@nmraka-1:~/devel/git/fmk/harbour/harbour$ unset HB_LIB_COMPILE HB_INC_COMPILE
hernad@nmraka-1:~/devel/git/fmk/harbour/harbour$ make

fmk/harbour util skripte¶

hernad@nmraka-1:~/devel/git/fmk/fmk_lib/scripts$ cp find_symbol_in_lib.sh fnd_c fnd_ch fnd_prg ~/bin

ruby gems, rake¶

hernad@nmraka-1:~$ sudo apt-get install rubygems rake

rubinius build¶

#15071

gtk, glib development¶

dokumenti:

hernad@nmraka-1:~$ sudo apt-get install libglib2.0-doc libgtk2.0-doc

firefox: file:///usr/share/gtk-doc/html

ruby development¶

hernad@nmraka-1:~/devel/git$ sudo apt-get install ruby1.8-dev

xulrunner dev¶

hernad@nmraka-1:~$ sudo apt-get install xulrunner-1.9-dev

fwbuilder¶

hernad@nmraka-1:~$ sudo apt-get install fwbuilder

sipsak - sip test tool¶

hernad@nmraka-1:~$ aptitude search sipsak

p   sipsak                          - SIP Swiss army knife                     

hernad@nmraka-1:~$ sipsak -s sip:90@asterisk.bring.out.ba:5060 -vv

message received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 127.0.1.1:57500;branch=z9hG4bK.1a0d8889;alias;received=192.168.45.166;rport=58410
From: sip:sipsak@127.0.1.1:57500;tag=63aece08
To: sip:90@asterisk.bring.out.ba:5060;tag=as63ff529c
Call-ID: 1672400392@127.0.1.1
CSeq: 1 OPTIONS
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
Contact: <sip:192.168.45.4>
Accept: application/sdp
Content-Length: 0

** reply received after 2.029 ms **
   SIP/2.0 200 OK
   final received

openvz parametri¶

/etc/sysctl.conf

net.ipv4.conf.eth0.proxy_arp=1

net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0

net.ipv4.conf.all.forwarding=1

$sudo sysctl -p

git via core.editor vi¶

ažurirao i git wiki

ruby ri¶

hernad@nmraka-1:~/devel/git/jruby/docs$ sudo apt-get install ri

ruby gems hernad pristup¶

hernad@nmraka-1:~$ sudo chown hernad.users -R /var/lib/gems/1.8
hernad@nmraka-1:~$ sudo chown hernad.users /usr/bin

hernad@nmraka-1:~$ gem install rails -y

ruby mysql¶

hernad@nmraka-1:~/devel/git/fmk/harbour/my_samples/ruby_ext$ gem install mysql

Need to update 1 gems from http://gems.rubyforge.org
.
complete
Select which gem to install for your platform (i486-linux)
 1. mysql 2.7.3 (mswin32)
 2. mysql 2.7.1 (mswin32)
 3. mysql 2.7 (ruby)
 4. mysql 2.6 (ruby)
 5. Skip this gem
 6. Cancel installation
> 3
Building native extensions.  This could take a while...
Successfully installed mysql-2.7

openoffice.org devel, openoffice.org netbeans plugin #15096¶

hernad@nmraka-1:/usr/lib/openoffice$ sudo apt-get install openoffice.org-dev openoffice.org-java

gtk gnome dev (za xhb potrebno)¶

hernad@nmraka-1:~/devel/git/redmine-1.bring.out.ba/xhgtk/samples/functions$ sudo apt-get install libglade2-dev

pdfedit¶

hernad@nmraka-1:~$ aptitude search pdfedit

p   pdfedit                         - Editor for manipulating PDF documents

qdvdauthor¶

hernad@nmraka-1:~$ sudo apt-get install qdvdauthor

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Slijedeći dodatni paketi će biti instalirani:
  dvd-slideshow dvdauthor ffmpeg imagemagick lame libartsc0 libenca0 libfaac0
  libggi2 libgif4 libgii1 libgii1-target-x libimlib2 liblame0
  libmjpegtools0c2a libnetpbm10 libquicktime1 libsox0 libsvga1 libswscale1d
  libx264-57 libxcb-shape0 libxcb-shm0 libxcb-xv0 libxine1 libxine1-bin
  libxine1-console libxine1-ffmpeg libxine1-misc-plugins libxine1-plugins
  libxine1-x libxvidcore4 libxvmc1 mjpegtools mplayer mplayer-skins netpbm sox
  videotrans vorbis-tools
Predloženi paketi:
  libggi-target-emu libggi-target-monotext libggimisc2 libsox-fmt-all gxine
  xine-ui libxine1-doc libxine-doc libxine1-gnome mpeg2dec a52dec ladspa-sdk
  libdvdcss mplayer-doc w32codecs
Preporučeni paketi:
  toolame jhead libggi-target-x libggi-target libsox-fmt-base libsox-fmt-alsa
  libsox-fmt-ao libsox-fmt-oss
Slijedeći NOVI paketi će biti instalirani:
  dvd-slideshow dvdauthor ffmpeg imagemagick lame libartsc0 libenca0 libfaac0
  libggi2 libgif4 libgii1 libgii1-target-x libimlib2 liblame0
  libmjpegtools0c2a libnetpbm10 libquicktime1 libsox0 libsvga1 libswscale1d
  libx264-57 libxcb-shape0 libxcb-shm0 libxcb-xv0 libxine1 libxine1-bin
  libxine1-console libxine1-ffmpeg libxine1-misc-plugins libxine1-plugins
  libxine1-x libxvidcore4 libxvmc1 mjpegtools mplayer mplayer-skins netpbm
  qdvdauthor sox videotrans vorbis-tools
0 upgraded, 41 newly installed, 0 to remove and 0 not upgraded.
Need to get 18,7MB of archives.

recordmydesktop¶

hernad@nmraka-1:/tmp/project_1$ sudo apt-get install gtk-recordmydesktop

ruby-gnome2¶

hernad@nmraka-1:~$ sudo apt-get install ruby-gnome2

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Slijedeći dodatni paketi će biti instalirani:
  libart2-ruby libart2-ruby1.8 libatk1-ruby libatk1-ruby1.8 libcairo-ruby1.8
  libgconf2-ruby libgconf2-ruby1.8 libgdk-pixbuf2-ruby libgdk-pixbuf2-ruby1.8
  libglade2-ruby libglade2-ruby1.8 libglib2-ruby1.8 libgnome2-ruby
  libgnome2-ruby1.8 libgnomecanvas2-ruby libgnomecanvas2-ruby1.8
  libgnomeprint2-ruby libgnomeprint2-ruby1.8 libgnomeprintui2-ruby
  libgnomeprintui2-ruby1.8 libgnomevfs2-ruby libgnomevfs2-ruby1.8
  libgtk-mozembed-ruby libgtk-mozembed-ruby1.8 libgtk2-ruby libgtk2-ruby1.8
  libgtkglext1 libgtkglext1-ruby libgtkglext1-ruby1.8 libgtkhtml2-ruby
  libgtkhtml2-ruby1.8 libgtksourceview1-ruby libgtksourceview1-ruby1.8
  libmozjs0d libopengl-ruby libopengl-ruby1.8 libpanel-applet2-ruby
  libpanel-applet2-ruby1.8 libpango1-ruby libpango1-ruby1.8 librsvg2-ruby
  librsvg2-ruby1.8 libvte-ruby libvte-ruby1.8 libxul-common libxul0d
Slijedeći NOVI paketi će biti instalirani:
  libart2-ruby libart2-ruby1.8 libatk1-ruby libatk1-ruby1.8 libcairo-ruby1.8
  libgconf2-ruby libgconf2-ruby1.8 libgdk-pixbuf2-ruby libgdk-pixbuf2-ruby1.8
  libglade2-ruby libglade2-ruby1.8 libglib2-ruby1.8 libgnome2-ruby
  libgnome2-ruby1.8 libgnomecanvas2-ruby libgnomecanvas2-ruby1.8
  libgnomeprint2-ruby libgnomeprint2-ruby1.8 libgnomeprintui2-ruby
  libgnomeprintui2-ruby1.8 libgnomevfs2-ruby libgnomevfs2-ruby1.8
  libgtk-mozembed-ruby libgtk-mozembed-ruby1.8 libgtk2-ruby libgtk2-ruby1.8
  libgtkglext1 libgtkglext1-ruby libgtkglext1-ruby1.8 libgtkhtml2-ruby
  libgtkhtml2-ruby1.8 libgtksourceview1-ruby libgtksourceview1-ruby1.8
  libmozjs0d libopengl-ruby libopengl-ruby1.8 libpanel-applet2-ruby
  libpanel-applet2-ruby1.8 libpango1-ruby libpango1-ruby1.8 librsvg2-ruby
  librsvg2-ruby1.8 libvte-ruby libvte-ruby1.8 libxul-common libxul0d
  ruby-gnome2
0 upgraded, 47 newly installed, 0 to remove and 0 not upgraded.
Need to get 9500kB of archives.
After this operation, 31,3MB of additional disk space will be used.

hernad@nmraka-1:~/ruby$ ruby /usr/share/doc/libgtk-mozembed-ruby/examples/ruby-gecko.rb

devede - program to create video DVDs¶

hernad@nmraka-1:~$ aptitude search devede

Čitam spiskove paketa... Done
Gradim stablo zavisnosti       
Reading state information... Done
Slijedeći dodatni paketi će biti instalirani:
  libtwolame0 mencoder vcdimager
Predloženi paketi:
  libdvdcss mplayer-doc w32codecs
Slijedeći NOVI paketi će biti instalirani:
  devede libtwolame0 mencoder vcdimager
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
Need to get 5444kB of archives.
After this operation, 12,4MB of additional disk space will be used.

gparted, ntfprogs¶

mogu li sa ovim alatima promjeniti ime particije ?

hernad@nmraka-1:~$ sudo apt-get install gparted ntfsprogs

https://help.ubuntu.com/community/RenameUSBDrive

hernad@nmraka-1:~$ sudo ntfslabel /dev/sdc1 wd500

google gears online/offline¶

dvd-slideshow ne radi¶

hernad@nmraka-1:~$ sudo apt-get install libsox-fmt-all
hernad@nmraka-1:~$ sudo sed -i 's/-ab 192/-ab 192k/g' /usr/bin/dvd-slideshow

napravio sam testni slideshow #15108

p4 klijent #15109¶

hernad@nmraka-1:~$ ls ~/bin/p4

/home/hernad/bin/p4

ubuntu openvz template¶

#15121

/var/lib/vz na /data disk¶

hernad@nmraka-1:/var/lib$ sudo mv vz /data/

ovo ipak nije bilo dobro, treba ovako

hernad@nmraka-1:/var/lib$ sudo vzctl stop 8001
hernad@nmraka-1:/var/lib$ sudo cp -av vz /data/

hernad@nmraka-1:/var/lib$ sudo ln -s /data/vz /var/lib/vz

build asterisk-a #14534¶

hernad@nmraka-1:~/devel/git/asterisk_bristuff/asterisk$ sudo apt-get build-dep asterisk

cinelerra #15239¶

aspell hr¶

hernad@nmraka-1:~$ sudo apt-get install aspell-hr

hernad@nmraka-1:~$ aspell dump dicts

en
en-variant_0
en-variant_1
en-variant_2
en-w_accents
en-wo_accents
en_CA
en_CA-w_accents
en_CA-wo_accents
en_GB
en_GB-ise
en_GB-ise-w_accents
en_GB-ise-wo_accents
en_GB-ize
en_GB-ize-w_accents
en_GB-ize-wo_accents
en_GB-w_accents
en_GB-wo_accents
en_US
en_US-w_accents
en_US-wo_accents
hr

hernad@nmraka-1:~$ cat test.txt

jjedan dva

hernad@nmraka-1:~$ aspell -l hr check test.txt

jjedan dva
======

----------------------------------------------------------

1) jedan                                3) tjedan
2) ijedan

i) Ignore                               I) Ignore all
r) Replace                              R) Replace all
a) Add                                  l) Add Lower
b) Abort                                x) Exit

virtualbox 2.0¶

hernad@nmraka-1:~/Desktop$ sudo dpkg -i virtualbox-2.0_2.0.0-36011_Ubuntu_hardy_i386.deb

Selecting previously deselected package virtualbox-2.0.
dpkg: considering removing virtualbox in favour of virtualbox-2.0 ...
dpkg: yes, will remove virtualbox in favour of virtualbox-2.0.
(Reading database ... 181246 files and directories currently installed.)
Unpacking virtualbox-2.0 (from virtualbox-2.0_2.0.0-36011_Ubuntu_hardy_i386.deb) ...
 * Stopping VirtualBox kernel module                                             *  done.
 * Shutting down VirtualBox host networking                                      *  done.
Setting up virtualbox-2.0 (2.0.0-36011_Ubuntu_hardy) ...
Installing new version of config file /etc/init.d/vboxnet ...
addgroup: The group `vboxusers' already exists as a system group. Exiting.
Messages emitted during module compilation will be logged to /var/log/vbox-install.log.
Success!
 * Starting VirtualBox kernel module                                             *  done.
 * Starting VirtualBox host networking                                           *  done.

CDRW pisanje problem #15255¶

ne kontam odakle ovaj problem

inkscape¶

hernad@nmraka-1:~$ sudo apt-get install inkscape

Setting up inkscape (0.46-0ubuntu2) ...

openvz /var/lib/vz/template/cache pristup¶

1. sudo chown hernad.users -R /var/lib/vz/template/cache

nakon toga mogu praviti template sesije bez root privilegija:

hernad@nmraka-1:/var/lib/vz/private$ tar cvfz ../../template/cache/ubuntu-8.04-i386-zimbra-5.0.9.tar.gz  .

miro video player (xul mozilla based)¶

http://www.getmiro.com/download/ubuntu.php

dobar player (testirao sa flv, mpeg fajlovima)

zekr 0.7.1¶

http://zekr.org/wiki/Installation#Ubuntu.2FDebian

hernad@nmraka-1:~$ cat /etc/apt/sources.list | grep zekr

deb http://ppa.launchpad.net/zekr/ubuntu hardy main

hernad@nmraka-1:~$ sudo apt-get install zekr-quran-translation-bs

Setting up zekr-quran-translation-bs-korkut (0.7.3-1~ppa3) ...

virtualbox 2.0.2¶

download-ovao, instalirao

rails plugins, gems¶

#15391

mmw rename¶

http://times.debian.net/1137

mmv "foo*.png" "bar#1.png"

mmv "*_*.txt" "#2_#1.txt"

abc_123.txt
def_456.txt
ghi_789.txt

=>

123_abc.txt
456_def.txt
789_ghi.txt

mmv "?*.txt" "#u1#2.txt"

john.txt
pete.txt

=>

John.txt
Pete.txt

gems update, gem path¶

hernad@nmraka-1:/data/devel/git/morph/morph_test$ sudo gem1.8 update --system

hernad@nmraka-1:/data/devel/git/morph/morph_test$ gem1.8 --version

1.3.0

hernad@nmraka-1:/data/devel/git/morph/morph_test$ sudo rm /usr/bin/gem

hernad@nmraka-1:/data/devel/git/morph/morph_test$ sudo ln -s /usr/bin/gem1.8 /usr/bin/gem

hernad@nmraka-1:/data/devel/git/morph/morph_test$ sudo rm /usr/bin/gem_server

hernad@nmraka-1:/data/devel/git/morph/morph_test$ gem server

Starting gem server on http://localhost:8808/

hernad@nmraka-1:/data/devel/git/morph/morph_test$ cat ~/.bashrc | grep PATH

export PATH=/home/hernad/bin:/home/hernad/.gem/ruby/1.8/bin:$PATH
export LD_LIBRARY_PATH=/usr/harbour/lib
PATH=/usr/harbour/bin:$PATH
export PATH
export PATH=$JAVA_HOME/bin:$PATH

hernad@nmraka-1:/data/devel/git/morph/morph_test$ gem install rails capistrano

WARNING:  Installing to ~/.gem since /usr/lib/ruby/gems/1.8 and
      /usr/bin aren't both writable.
WARNING:  You don't have /home/hernad/.gem/ruby/1.8/bin in your PATH,
      gem executables will not run.

najbitnije kod main.cf

relayhost = mail-gw-10.sigma-com.net 
mynetworks = 192.168.45.0/24 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128

7zip¶

hernad@nmraka-1:~$ sudo apt-get install p7zip-full

adobe acrobat reader 8.1.2 from medibuntu¶

hernad@nmraka-1:~$ sudo wget http://www.medibuntu.org/sources.list.d/hardy.list -O /etc/apt/sources.list.d/medibuntu.list
hernad@nmraka-1:~$ sudo apt-get update && sudo apt-get install medibuntu-keyring && sudo apt-get update

ovaj adobe koji sam instalirao ne sadrži url plugin pa kada kliknem na link ne idem na browser

hernad@nmraka-1:/data/home_1/hernad/netbeans/jdk1.6.0_10$ sudo apt-get install acroread-plugins

java 6 update 10 final release¶

juče izašao pa ga instalirao (*.bin) u ~/netbeans/jdk1.6.0_10

kako sada podesiti da je ova java default za aplete ?

sudo apt-get install galternatives

openoffice.ba launchpad ppa, #15594¶

instalirao sam firefox FireGPG da bih mogao čitati encriptovane - gpg-ovane poruke