Akcije
Podrška #14769
Zatvoren
hardy pulseaudio, asound ... podešenja, pregled trenutnog stanja
Dodano od Ernad Husremović prije skoro 17 godina. Izmjenjeno prije više od 16 godina.
Početak:
05.07.2008
Završetak:
% završeno:
0%
Procjena vremena:
Opis
gdje je šta ... kako provjeriti trenutna podešenja, koje config fajlove gledati
Povezani tiketi 1 (0 otvoreno — 1 zatvoren)
Izmjenjeno od Ernad Husremović prije skoro 17 godina
root@printserver:~# cat /proc/asound/cards
0 [CS4236 ]: CS4236 - CS4236
CS4236 at 0x534, irq 5, dma 1&0
1 [U0x46d0x8d9 ]: USB-Audio - USB Device 0x46d:0x8d9
USB Device 0x46d:0x8d9 at usb-0000:00:14.1-1, full speed
Izmjenjeno od Ernad Husremović prije skoro 17 godina
na nmraka-1 ovo radi
~/.asoundrc
# ALSA library configuration file
# Include settings that are under the control of asoundconf(1).
# (To disable these settings, comment out this line.)
</home/hernad/.asoundrc.asoundconf>
pcm.monitor {
type pulse
device alsa_output.pci_10de_55c_sound_card_0_alsa_playback_0.monitor
}
pcm.usb_mic {
type pulse
device alsa_input.usb_device_46d_8d9_noserial_if1_sound_card_0_alsa_capture_0
}
pcm.int_mic {
type pulse
device alsa_input.pci_10de_55c_sound_card_0_alsa_capture_0
}
pcm.rtp {
type pulse
device rtp.monitor
}
hernad@nmraka-1:~$ arecord -D int_mic test.wav
Recording WAVE 'test.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono Aborted by signal Interrupt...
hernad@nmraka-1:~$ aplay test.wav
... čujem što sam snimio ...
Izmjenjeno od Ernad Husremović prije skoro 17 godina
vratimo se printserveru:
root@printserver:~# cat /proc/asound/devices
0: [ 0] : control 1: : sequencer 4: [ 0- 0]: hardware dependent 16: [ 0- 0]: digital audio playback 24: [ 0- 0]: digital audio capture <<<<<<<<<<<<<<<<<<<<<< int_mic, pretpostavljam ... 32: [ 1] : control 33: : timer 56: [ 1- 0]: digital audio capture <<<<<<<<<<<<<<<<<<<<< usb-mic, pretpostavljam
tom logikom hw:0,0 i hw:1,0 su recording device-i
Izmjenjeno od Ernad Husremović prije skoro 17 godina
load-module module-alsa-sink device=hw:0,0 sink_name=pc_out load-module module-alsa-source device=hw:0,0 source_name=int_mic load-module module-alsa-source device=hw:1 source_name=usb_mic
Jul 6 01:41:30 printserver pulseaudio[5025]: module-suspend-on-idle.c: Sink pc_out idle for too long, suspending ... Jul 6 01:41:30 printserver pulseaudio[5025]: module-alsa-sink.c: Device suspended... Jul 6 01:41:30 printserver pulseaudio[5025]: module-suspend-on-idle.c: Source pc_out.monitor idle for too long, suspending ... Jul 6 01:41:30 printserver pulseaudio[5025]: module-suspend-on-idle.c: Source int_mic idle for too long, suspending ... Jul 6 01:41:30 printserver pulseaudio[5025]: module-alsa-source.c: Device suspended... Jul 6 01:41:30 printserver pulseaudio[5025]: module-suspend-on-idle.c: Source usb_mic idle for too long, suspending ... Jul 6 01:41:30 printserver pulseaudio[5025]: module-alsa-source.c: Device suspended...
Izmjenjeno od Ernad Husremović prije skoro 17 godina
hernad@printserver:/root$ aplay -l|grep card
card 0: CS4236 [CS4236], device 0: CS4231 [CS4236]
hernad@printserver:/root$ arecord -l| grep card
card 0: CS4236 [CS4236], device 0: CS4231 [CS4236] card 1: U0x46d0x8d9 [USB Device 0x46d:0x8d9], device 0: USB Audio [USB Audio]
Izmjenjeno od Ernad Husremović prije skoro 17 godina
hernad@printserver:~$ pulseaudio | grep source
I: main.c: Called SUID root and real-time/high-priority scheduling was requested in the configuration. However, we lack the necessary priviliges: I: main.c: We are not in group 'pulse-rt' and PolicyKit refuse to grant us priviliges. Dropping SUID again. I: main.c: For enabling real-time scheduling please acquire the appropriate PolicyKit priviliges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user. I: main.c: Note that real-time/high-priority scheduling is NOT normally required. If you experience crackling or other sound anomalies, consider one or more of the above solutions. I: main.c: High-priority scheduling enabled in configuration but now allowed by policy. Disabling forcibly. I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted I: main.c: This is PulseAudio 0.9.10 I: main.c: Page size is 4096 bytes I: main.c: Fresh high-resolution timers available! Bon appetit! D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-hal-detect.so': success I: module-hal-detect.c: Trying capability alsa D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/computer_alsa_timer D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/computer_alsa_sequencer D: module-hal-detect.c: Loading module-alsa-source with arguments 'device_id=1 source_name=alsa_input.usb_device_46d_8d9_noserial_if1_sound_card_0_alsa_capture_0' <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< D: alsa-util.c: Trying front:1... I: alsa-util.c: PCM device front:1 refused our hw parameters: Invalid argument D: alsa-util.c: Trying surround40:1... I: alsa-util.c: PCM device surround40:1 refused our hw parameters: Invalid argument D: alsa-util.c: Trying surround41:1... I: alsa-util.c: PCM device surround41:1 refused our hw parameters: Invalid argument D: alsa-util.c: Trying surround50:1... I: alsa-util.c: PCM device surround50:1 refused our hw parameters: Invalid argument D: alsa-util.c: Trying surround51:1... I: alsa-util.c: PCM device surround51:1 refused our hw parameters: Invalid argument D: alsa-util.c: Trying surround71:1... I: alsa-util.c: PCM device surround71:1 refused our hw parameters: Invalid argument D: alsa-util.c: Trying hw:1 as last resort... W: alsa-util.c: Device hw:1 doesn't support 44100 Hz, changed to 16000 Hz. W: alsa-util.c: Device hw:1 doesn't support 2 channels, changed to 1. I: module-alsa-source.c: Successfully opened device hw:1. I: module-alsa-source.c: Successfully enabled mmap() mode. I: alsa-util.c: Successfully attached to mixer 'hw:1' I: alsa-util.c: Cannot find mixer control "Capture". I: alsa-util.c: Using mixer control "Mic". I: source.c: Created source 0 "alsa_input.usb_device_46d_8d9_noserial_if1_sound_card_0_alsa_capture_0" with sample spec "s16le 1ch 16000Hz" <<<<<<<<<<< I: module-alsa-source.c: Using 8 fragments of size 2204 bytes. I: alsa-util.c: All 1 channels can be mapped to mixer channels. Using hardware volume control. D: module-alsa-source.c: Thread starting up D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+29 I: module.c: Loaded "module-alsa-source" (index: #0; argument: "device_id=1 source_name=alsa_input.usb_device_46d_8d9_noserial_if1_sound_card_0_alsa_capture_0"). D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/usb_device_46d_8d9_noserial_if1_sound_card_0_alsa_control__1 I: module-hal-detect.c: Loaded 1 modules. I: module.c: Loaded "module-hal-detect" (index: #1; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-esound-protocol-unix.so': success I: module.c: Loaded "module-esound-protocol-unix" (index: #2; argument: ""). I: protocol-native.c: loading cookie from disk. I: module.c: Loaded "module-native-protocol-unix" (index: #3; argument: ""). I: protocol-native.c: using already loaded auth cookie. I: protocol-native.c: using already loaded auth cookie. I: module.c: Loaded "module-native-protocol-tcp" (index: #4; argument: ""). I: module-volume-restore.c: starting with empty ruleset. I: module.c: Loaded "module-volume-restore" (index: #5; argument: ""). D: module-default-device-restore.c: No previous default sink setting, ignoring. D: module-default-device-restore.c: No previous default source setting, ignoring. I: module.c: Loaded "module-default-device-restore" (index: #6; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #7; argument: ""). I: main.c: Daemon startup complete. D: module-hal-detect.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
Izmjenjeno od Ernad Husremović prije skoro 17 godina
snimanje je pod pod hernad account-om
pcm.usb_mic {
type pulse
device alsa_input.usb_device_46d_8d9_noserial_if1_sound_card_0_alsa_capture_0
}
a pulse/default.pa je podešen na hal
### Load audio drivers statically (it's probably better to not load ### these drivers manually, but instead use module-hal-detect -- ### see below -- for doing this automatically) #load-module module-alsa-sink device=hw:0 sink_name=pc_out #load-module module-alsa-sink sink_name=pc_out #load-module module-alsa-source device=hw:0,0 source_name=int_mic #load-module module-alsa-source device=plughw:1,0 source_name=usb_mic #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-hal-detect.so load-module module-hal-detect .else ### Alternatively use the static hardware detection module (for systems that ### lack HAL support) load-module module-detect .endif
direktno učitavanje alsa modula iz nekong razloga nije proradilo
ali mi je ostalo podešavanje jačine zvuka:
hernad@printserver:~$ sudo apt-get install padevchooser
Izmjenjeno od Ernad Husremović prije skoro 17 godina
a da li može na ovaj fol
ovako sam na ifold-u podešavao zvuk
/usr/bin/amixer set Master unmute /usr/bin/amixer set PCM unmute /usr/bin/amixer set Master front,85% /usr/bin/amixer set PCM front,85%
Izmjenjeno od Ernad Husremović prije skoro 17 godina
hernad@printserver:~$ amixer set Capture front,100%
Simple mixer control 'Capture',0 Capabilities: cvolume Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 15 [100%] Front Right: Capture 15 [100%]
Izmjenjeno od Ernad Husremović prije skoro 17 godina
hernad@printserver:~$ amixer set PCM unmute
Simple mixer control 'PCM',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 63 Mono: Front Left: Playback 63 [100%] [on] Front Right: Playback 63 [100%] [on]
hernad@printserver:~$ amixer set PCM front,100%
Simple mixer control 'PCM',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 63 Mono: Front Left: Playback 63 [100%] [on] Front Right: Playback 63 [100%] [on]
Izmjenjeno od Ernad Husremović prije više od 16 godina
- Status promijenjeno iz Dodijeljeno u Zatvoreno
Akcije